How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tool Hut Your Own Question
Tool Hut
Tool Hut, ASE Certified Technician
Category: Chevy
Satisfied Customers: 551
Experience:  Owner of a mobile diagnostics company assisting auto technicians with difficult vehicles
Type Your Chevy Question Here...
Tool Hut is online now
A new question is answered every 9 seconds

My head lights 't work or low beam. My hdlp pwr relay

Customer Question

Hi my head lights don't work hi or low beam. My hdlp pwr relay buzzes. And kills my truck. Pull thr hdlp pwr relay out and truck runs. Also if i hold my washer pump on kills my truck release it and it will stay running. ??? 2002 s10 zr2
Submitted: 2 years ago.
Category: Chevy
Customer: replied 2 years ago.
Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Expert:  Tool Hut replied 2 years ago.

Hi, My Name is ***** ***** for posting your question to just answer. I am a ASE Certified Master Auto Technician with 20 years experience. I am confident we can resolve your problem together.Please remember I don't know your skill level. I can't see, smell, hear, or touch the vehicle. It may take a few back and forth replies to get to a satisfactory resolution.I also try to give all of the information you may need expecting a positive rating.

I would say you definitely have a ground problem.

I would start here:

There is a Splice pack (picture attached) near the ash tray that controls a lot of your interior functions. I would check the splice pack for corrosion and on the right side of the dash there are 2 ground wires. make sure they are tight and clean.

Expert:  Tool Hut replied 2 years ago.

disregard splice pack picture. I attached wrong picture

Expert:  Tool Hut replied 2 years ago.

Here is better picture. It is probably taped to a harness.

Customer: replied 2 years ago.
Hi i dont see that
Customer: replied 2 years ago.