How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan
Dan, Technician
Category: Chevy
Satisfied Customers: 24001
Experience:  Independent Shop Experience, 2 Year Automotive Diploma, & Access to Information Database
17871496
Type Your Chevy Question Here...
Dan is online now
A new question is answered every 9 seconds

Chevrolet impala: replacing starter on 2006 impala. someone

Customer Question

replacing starter on 2006 impala. someone else took wires off of old one. can't figure out how to wire it back. I have 2 heavy wires (1 with rubber boot over end). both of these fit around either one of the screws on the starter or on both. one of the screws has ground wire already attached going to the starter. plus I have a small wire that plugs in the middle (that I can figure out).
Submitted: 2 years ago.
Category: Chevy
Expert:  Dan replied 2 years ago.
Hello, my name is ***** ***** I'm here to help get your problem solved. The two large wires should go to the same terminal on solenoid. Let me know if you have more questions, thanks.
Customer: replied 2 years ago.
thanks that should work
Expert:  Dan replied 2 years ago.
No problem, let me know if you run into more questions. Thanks.