How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask SuperDave Your Own Question
SuperDave, ASE Certified Technician
Category: Chevy
Satisfied Customers: 1491
Experience:  over 16 years experience
Type Your Chevy Question Here...
SuperDave is online now
A new question is answered every 9 seconds

I need to disable my stock alarm on my hevy silverado ss 2

Customer Question

I need to disable my stock alarm on my hevy silverado ss 2005
Submitted: 2 years ago.
Category: Chevy
Expert:  SuperDave replied 2 years ago.
Thank you for using Just Answer.I will do my best to answer your question.The Alarm is part of the BCM & cannot be disconnected, without disabling components that are connected to it.
To Disarm :
Remove the two 7mm screws retaining the Driver Knee Panel under the Steering Column.
Remove the Driver Knee Panel.
Below & slightly to the left of the Steering Column is the BCM, that has 3 plugs
Connect one end of a piece of wire to the Light GREEN (-) wire in the Violet Connector at the BCM, under the Steering Column. Connect the other end of the piece of wire to Ground (chassis)
That will Disarm the Alarm until you remove the wire.