How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Edgar Your Own Question
Edgar
Edgar, ASE Certified Technician
Category: Chevy
Satisfied Customers: 48
Experience:  22 years General Motors Technician, ASE Master Tech certified
71268010
Type Your Chevy Question Here...
Edgar is online now
A new question is answered every 9 seconds

2008 chevy equinox steering

Customer Question

2008 chevy equinox steering
Submitted: 2 years ago.
Category: Chevy
Expert:  Edgar replied 2 years ago.
Hello my name is ***** ***** I'll be happy to help you today, does it has any trouble codes? Did you replace the power steering control module and program it? Also did you replace the motor also?
Customer: replied 2 years ago.
just the module i cant get it to reprogram what am i doing wrong
Expert:  Edgar replied 2 years ago.
If you trying to reprogram the module check that the module has good power and ground, are you able to communicate with the module with the scan tool? Also make sure you have the correct part number
Customer: replied 2 years ago.
yes no problem it cmmunicates with the module you have go into abs to program it
Expert:  Edgar replied 2 years ago.
Before you go into ABS to calibrate, you have to program the VIN number of the vehicle to the module, that needs to be done through the GM dealership, if the VIN in not programmed, you will not be able to calibrate with the scan tool