Chevy

Chevrolet Repair Questions? Ask a Chevy Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Chevy Questions
1990 S10 Blazer 4.3 4x4 Sport, the idle is pretty good at
1990 S10 Blazer 4.3 4x4 Sport, the idle is pretty good at 650 ,at 190F - 200F. But as it runs for a while doing diagnostics the IAC goes to zero. It starts out around 15-20 counts. The manual says to … read more
J Hall
J Hall
retired
none
1,701 satisfied customers
One minute please I'm on phone. 06 chevty 1500 express 4.6
06 chevty 1500 express 4.6 v6. I have a repair shop and this van was in for 2nd time with same issue, It runs fine for a day or so and suddenly while backing into park the engine starts to buck and tries to stall and it will run badly after that. It had a po122 code and I changed the tps and the connector and It seemed ok for a day or so but samething happened. My scanner read 0.00% at idle when it went out and came back reading 14%. I then took the iac valve out and cleaned it along with throttle body it was back to 0.00% … read more
Chris (aka-Moose)
Chris (aka-Moose)
Technician
3,444 satisfied customers
Is there any other way to reset/relearn idle without a tech
Is there any other way to reset/relearn idle without a tech 2 . I have a 2008 chevy silverado 1500 4.3 v6 2wd and replaced the throttle body with the same one that was used by chevy and it keeps displ… read more
David Craig
David Craig
OWNER/MECHANIC
Associates
14,099 satisfied customers
I just swap a engine from a 1997 s -10 4.3 to a 2000 express
I just swap a engine from a 1997 s -10 4.3 to a 2000 express 4.3 runs good But now I have code's up 2 speed sensor's a and b /cam to crank / torque converter what did I miss… read more
Tool Hut
Tool Hut
Owner
540 satisfied customers
can you tell me where the bleeder valve or valves are on the
can you tell me where the bleeder valve or valves are on the coolant system on the express van 4.3 and how I should bleed it with the radiator full of antifreeze ?… read more
ASEMaster35yrs
ASEMaster35yrs
Vocational, Technical or Trade Scho
2,061 satisfied customers
Chevrolet Express: I have a 2004 Chevy Express 2500 4.8L V8
I have a 2004 Chevy Express 2500 4.8L V8 that is driving me crazy. I bought it from an auction a couple of weeks ago. The van looked like it had been parked for quiet a while. New battery, oil change,… read more
GM Tech (Cam)
GM Tech (Cam)
Owner/Technician
Vocational, Technical or Trade Scho
28,386 satisfied customers
Chevrolet Blazer: 98 blazer, v6, auto. surges below 2000 rpm
98 blazer, v6, auto. surges below 2000 rpm intermittently. several mechanics can't diagnose. threw service engine soon, autozone says plugs, wires, ignition coil all possibilities… read more
Expert
Expert
10,448 satisfied customers
98 chevy: pcm..relearn procedure w/o using the tech 2. vehicle surges
I changed pcm in my 98 chevy express van. what is the relearn procedure w/o using the tech 2. vehicle surges at idle.… read more
Pete
Pete
Automotive Diagnostic Specialist
General auto certifications
37,515 satisfied customers
How do I adjust the idle on a silverado 4.3 wt 08?
How do I adjust the idle on a silverado 4.3 wt 08? The truck idles at about 1100 rpm after I cleaned the throttle body… read more
Jerry Newton
Jerry Newton
Chevy Technician
Vocational, Technical or Trade Scho
2,804 satisfied customers
2001 chevy blazer: 4.3 vortec v6 high idle..slow down
2001 chevy blazer 4.3 vortec v6 high idle. AIC sensor has been replaced still high idle approx 3000 rpms will not slow down only when engine is cold.… read more
Amedee
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
24,192 satisfied customers
tahoe: cab..blown up 4.3 what year engines will replace it..it swap
Ihave ab 02 silverrado short bed standard cab with a blown up 4.3 what year engines will replace it ? or I have access to an 02 tahoe with engine and all components avaible, will it swap in replacing … read more
Mike S.
Mike S.
Chevy Mechanic
Vocational, Technical or Trade Scho
9,511 satisfied customers
Will a 2008 4.3 v6 go into a 1999 s10 pick up with a 4.
will a 2008 4.3 v6 go into a 1999 s10 pick up with a 4.3 knock sensors in different places… read more
Jay
Jay
Auto Mechanic
Vocational, Technical or Trade Scho
596 satisfied customers
98 Blazer: 4wd, 4.3l; When engine is cold, rpm..surges..under load
'98 Blazer, 4wd, 4.3l; When engine is cold, rpm around 2000, surges up to 300-500 rpm for a couple seconds, drops back to previous, then surges again 5-10 later. Usually when engine is cold and under … read more
Dan
Dan
Automotive Technician
Vocational, Technical or Trade Scho
25,003 satisfied customers
I have a 99 Express Van 5.7L Engine. Idle races very fast.
I have a 99' Express Van 5.7L Engine. Idle races very fast. I tried replacing the Throttle Position Sensor, The Idle Sensor and most recently the MAF Sensor with a used sensor. After replacing the MAF… read more
John
John
MASTER AUTOMOTIVE TECHNICIAN
2 YEARS COLLEGE
9,106 satisfied customers
2000 chevy: 134,000 mi..4.3 litre.when i start it it idles high .then
i have a 2000 chevy express cargo van,134,000 mi. 4.3 litre.when i start it it idles high .then when i put it in gear it idles even higher to the point i dont have to accelerate to get going 15 mph.i … read more
frank
frank
Vocational, Technical or Trade Scho
1,892 satisfied customers
1990 chevy: quit running..crank..ignition module..stop signs, idles
My 1990 chevy s-10 4.3 v6 quit running and would crank over but not start. I put in a new ignition module and it started and ran, but died at stop signs, idles to slow. put in new IAC valve but dieds … read more
goodwrench9124
goodwrench9124
ASE Certified Technician
Vocational, Technical or Trade Scho
2,045 satisfied customers
98 Chevy Blazer: trouble code..V6..hooked..Idle Air Control system rpm
A trouble code has come up on my 98 Chevy Blazer (4.3 ltr V6). I hooked the computer up to it and the code came up as:P0507- Idle Air Control System RPM higher than expected. I am trying to find out w… read more
Davo
Davo
Master Auto Tech/manager of auto shop
Vocational, Technical or Trade Scho
1,644 satisfied customers
1989 chevy: van..Fuel injection..idel..much fuel thru the injectors
Hello- 1989 chevy van with 4.3 V6. Fuel injection will not Idel down! It looks to be dumping to much fuel thru the injectors. Checked all hoses and no air leaks. I am stumped... please help! Thank you… read more
BOBBYSS
BOBBYSS
Automotive Repair/Damage Investigator
Associate Degree
14,739 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was having a terrible problem with the wheel bearings on my 98 Chevy Cavalier and I suspect that using this website saved me plenty of time and money.

Todd LRochester NY

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

< Previous | Next >

Meet the Experts:

Gary

Gary

Chevy Technician

9,659 satisfied customers

15 years GM master tech

Tim&#039;s Auto Repair

Tim's Auto Repair

mechanic

9,622 satisfied customers

Have owned a repair shop for 25 yrs.

Dave Nova

Dave Nova

Chevrolet Technician

7,092 satisfied customers

ASE Master Certification. GM World Class Certification

Chris (aka-Moose)

Chris (aka-Moose)

Technician

3,444 satisfied customers

24 years of experience diagnosing & repairing

Jerry Newton

Jerry Newton

Chevy Technician

2,804 satisfied customers

ASE Master Technician, L1, Master GM Technician. Over 20 years of bumper to bumper GM experience.

Mike S.

Mike S.

Chevy Mechanic

9,511 satisfied customers

ASE Certified Master Technician

goodwrench9124

goodwrench9124

ASE Certified Technician

2,045 satisfied customers

Ase Master Certified, GM Master Certified Tech. Awarded GM Top performer, Hybrid certified

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x