How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary, Chevy Technician
Category: Chevy
Satisfied Customers: 17006
Experience:  15 years GM master tech
Type Your Chevy Question Here...
Gary is online now
A new question is answered every 9 seconds

Chevrolet Silverado 2500 HD: Trying to get the starter out

This answer was rated:

Trying to get the starter out of a 1996 Chevy Silverado 2500 HD 6.5, bolts out but starter won't come out of housing ...

Welcome to Justanswer ! my name is XXXXX XXXXX i will do my best to assist you with this problem

this transmission has the lower half aluminum cover on the bottom of the transmission like the inspection cover ? like this ?

Flywheel-Housing-Dust-Cover-GM-15671930-/00/s/MzM2WDc0Mw%253D%253D%252Fz%252F-3UAAOxy2E1SHl0Q%252F%2524(KGrHqRHJE8FIHknK8gSBSHl0QtIdQ~~60_3.JPG" alt=""/>

Customer: replied 4 years ago.

yes it is


the way to get these starters out is to drop down that big aluminum lower shield and then that should give the nose of the starter enough room to side down and out
Gary and other Chevy Specialists are ready to help you