Chevy

Chevrolet Repair Questions? Ask a Chevy Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Chevy Questions
I am trying to ascertain the best cam and roller lifters to
I am trying to ascertain the best cam and roller lifters to use on my chevy 388 stroker. Its in a 1969 C-20 that weighs aprox 4500lbs has a 2500 rpm stall converter , 4:56:1 gears with a gear vendors … read more
Gary
Gary
Gold Certified GM Technician
Vocational, Technical or Trade School
2,993 satisfied customers
I havea 350 chevy engine that ran good,i didnt know what was
I havea 350 chevy engine that ran good,i didnt know what was inside so had it tore down and inspected,replaces rod bearings cambearings piston rings oil pump and water pump.discoverde the engine had h… read more
J Hall
J Hall
retired
none
1,427 satisfied customers
I rebuilt my motor and installed new roller lifter.i have
I rebuilt my motor and installed new roller lifter.i have adjusted them several times but can not get rid of the valve rattle and the hesitation upon acceptance. … read more
Jared D
Jared D
Shop Supervisor
Bachelor's
2,521 satisfied customers
Chevrolet: Looking for a real chevy performance expert, please
Looking for a real chevy performance expert, please do not even attempt to answer with out real expertise and can answer with authority and specificty . I have a 1993 chevy model K19 body TK VIN numbe… read more
tripletauto
tripletauto
Shop Foreman
Associate Degree
242 satisfied customers
Chevrolet: I have a 1993 chevy model K19 body TK VIN number
I have a 1993 chevy model K19 body TK VIN number 2GCEK19K0P1221980, can you tell me what motor it had in it exactly ?? It is a basket case and I have the heads and manifold but not the block. I bought… read more
ASEMaster35yrs
ASEMaster35yrs
Chevy Technician
Vocational, Technical or Trade Scho
2,095 satisfied customers
350 chevy: had oil leak engine runs..compression..intake..valve cover
i have 383 sroked 350 chevy professionaly built smoked at same time flattend cam put in perfect circle rings after honing still smoked all looks good no taper two differant sets of heads two differant… read more
Anthony
Anthony
Master Automobile Technician
Vocational, Technical or Trade Scho
11,778 satisfied customers
1992 chevrolet: with a 350 with a vin engine code K..cam shaft..trucks
I have a 1992 chevrolet 2500 with a 350 with a vin engine code K . Now appearantly after 1987 GM machined all the gen I 350 blocks with a retainer plate for hydraulic roller cams to secure the cam sha… read more
kalamykid
kalamykid
Pactor automotive
Vocational, Technical or Trade Scho
6,156 satisfied customers
1975 chevy: cast iron heads,intake and need to pull 17.5 vac..lifters
trying to get as much HP with cast iron heads,intake and need to pull 17.5 vac out of chevy 350 for mud raceing i cant have roler rokers or lifters what can i do 1975 chevy pickup… read more
Tim's Auto Repair
Tim's Auto Repair
mechanic
High School or GED
9,477 satisfied customers
1987 chevy: horsepower..350 cast iron vortec heads..piston
how can i get 375-400 horsepower out of a 1987 chevy 350 truck engine using 350 cast iron vortec heads with a standard piston bore… read more
Joe
Joe
Owner Kingsland Auto & Marine Services
Vocational, Technical or Trade Scho
1,617 satisfied customers
replaced the cam to my 2005 chevy silverado 4.8. put number
replaced the cam to my 2005 chevy silverado 4.8. put number 1 piston on TDC and timing marks pointing together on the cam and crankshaft gears. starts but is missing alot had the truck running for abo… read more
Neal
Neal
Auto repair pro, 30 years experience
Associate Degree
8,388 satisfied customers
chevy: i went to big on the cam..valve clearance..heads..intake
Doing my first chevy 383 build and i think i went to big on the cam. My question is what is the easyest way to check piston to valve clearance? Running Dart pro 1 heads with 2.08 intake valves and 18 … read more
Carfix4you
Carfix4you
Lead Technician
Associate Degree
412 satisfied customers
64 Chevy impala: rings..pistons..heads..the compression was too high
I have a 327 out of a 64 Chevy impala, which was over bored .30 and with standard rings and trw forged pistons. I had 64 cc heads, which I later changed to 74cc because the compression was too high. T… read more
GM Master Tech 01
GM Master Tech 01
GM certified diesel master tech
226 satisfied customers
93 Chevy Caprice: Interceptor..203,000 miles i am rebuilding it..LT1
I have a 93 Chevy Caprice Police Interceptor with the 350. Now at 203,000 miles i am rebuilding it. Some have said that it is the 350 LT1 and a few has said that it''s not. It has the 4" bore and a 3.… read more
Wrenchtech
Wrenchtech
Vocational, Technical or Trade Scho
616 satisfied customers
350 chevy: to know what type pistons and cam..crank shaft
i am building a 350 chevy engine to put in a chevy apache pickup and need to know what type pistons and cam and do i need to do anything to the crank shaft… read more
ase_master327
ase_master327
Owner & Student
High School or GED
3,214 satisfied customers
Just rebuilt a chevy 305, new rings, block checked (machine ...
Just rebuilt a chevy 305, new rings, block checked (machine shop), new valves - lapped by machine shop. Engine running ok, however a compression test shows only 90 PSI on each piston - what could caus… read more
Jerry
Jerry
Service consultant
Vocational, Technical or Trade Scho
13,108 satisfied customers
93 chevy truck: heads..the 98-100cc chambers..compression..pistons
I have a 454 out of a 93 chevy truck that I want to "heat up". I wanted to put a set of 66-69 closed chamber oval port heads with the 98-100cc chambers on to raise the compression a bit. Will the stoc… read more
John
John
MASTER AUTOMOTIVE TECHNICIAN
2 YEARS COLLEGE
9,106 satisfied customers
I have 1956 chevy 265 motor the oil wont go to ...
I have 1956 chevy 265 motor the oil won't go to lifters, oil goes to cam and crank.have replaced cam bearings,have pulled plugs at back of block by cam holes are clear… read more
Bob
Bob
Vocational, Technical or Trade Scho
2,784 satisfied customers
1987 Chevy: timing..carb..Intake..Cam and lifters, Headers
I have a 1987 Chevy Big Block 454, and I would like to know the horse power rating for this engine. It came out of a C-30 pick up truck, and has roller rockers, and timing gear drive set. I have an Ed… read more
john newland
john newland
mechanic
Vocational, Technical or Trade Scho
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was having a terrible problem with the wheel bearings on my 98 Chevy Cavalier and I suspect that using this website saved me plenty of time and money.

Todd LRochester NY

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

< Previous | Next >

Meet the Experts:

GM Tech (Cam)

GM Tech (Cam)

Chevy Technician

16,931 satisfied customers

GM Grand Master Technician 2007. 14 years experience.

Gary

Gary

Chevy Technician

18,052 satisfied customers

15 years GM master tech

Tim&#039;s Auto Repair

Tim's Auto Repair

mechanic

9,477 satisfied customers

Have owned a repair shop for 25 yrs.

Dave Nova

Dave Nova

Chevrolet Technician

7,092 satisfied customers

ASE Master Certification. GM World Class Certification

Chris (aka-Moose)

Chris (aka-Moose)

Technician

3,187 satisfied customers

24 years of experience diagnosing & repairing

Jerry Newton

Jerry Newton

Chevy Technician

2,804 satisfied customers

ASE Master Technician, L1, Master GM Technician. Over 20 years of bumper to bumper GM experience.

Mike S.

Mike S.

Chevy Mechanic

2,317 satisfied customers

ASE Certified Master Technician

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x