Chevy

Chevrolet Repair Questions? Ask a Chevy Mechanic for Answers ASAP

Ask an Expert,
Get an Answer ASAP!

Chevy

Can i program my own fob for a 2006 chev cobalt?

Customer Question
can i program my own fob for a 2006 chev cobalt?
Submitted: 5 years ago.Category: Chevy
Ask Your Own Chevy Question
Answered in 6 minutes by:
12/3/2011
Chevy Mechanic: Randall C, ASE Master Tech replied 5 years ago
Randall C
Randall C, ASE Master Tech
Category: Chevy
Satisfied Customers: 12,956
Experience: ASE Master, L1, 32 years, Diagnostic / Electrical Specialist
Verified
Hello, My name isXXXXX will do my best to assist you.

Unfortunatley you can not. It requires a scan too to program it and reset the BCM ( body control module)
If you wnat to see the procedure. Click HERE
Randall C
Randall C, ASE Master Tech
Category: Chevy
Satisfied Customers: 12,956
Experience: ASE Master, L1, 32 years, Diagnostic / Electrical Specialist
Verified
Randall C and 87 other Chevy Specialists are ready to help you
Ask your own question now
Ask Randall C Your Own Question
Randall C
Randall C
Randall C, ASE Master Tech
Category: Chevy
Satisfied Customers: 12,956
12,956 Satisfied Customers
Experience: ASE Master, L1, 32 years, Diagnostic / Electrical Specialist

Randall C is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was having a terrible problem with the wheel bearings on my 98 Chevy Cavalier and I suspect that using this website saved me plenty of time and money.

Todd LRochester NY

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

< Previous | Next >

Meet the Experts:

GM Tech (Cam)

GM Tech (Cam)

Chevy Technician

15,249 satisfied customers

GM Grand Master Technician 2007. 14 years experience.

Gary

Gary

Chevy Technician

9,196 satisfied customers

15 years GM master tech

Tim&#039;s Auto Repair

Tim's Auto Repair

mechanic

8,847 satisfied customers

Have owned a repair shop for 25 yrs.

Dave Nova

Dave Nova

Chevrolet Technician

7,092 satisfied customers

ASE Master Certification. GM World Class Certification

John

John

Master A.S.E Automotive technician

4,071 satisfied customers

A.S.E MasterTechnician A1-A8 w/L1,38 years experience General Motors Master Technician

Don - Mo Lurch

Don - Mo Lurch

Auto Mech / Electronics

2,900 satisfied customers

Chevrolet Cert., Heavy Line Mech, Race Shop Owner, Mobile Electronics.

Ron Z.

Ron Z.

- Chevy Tech -

2,682 satisfied customers

18+yrs experience. State Inspector and Chevy Diagnostics

< Previous | Next >

Related Chevy Questions
Brake pedal goes all the way to the floor but not all the
Brake pedal goes all the way to the floor but not all the time no indication of leaking brake fluid on any wheel cylinder and the master cylinder is full could this be a failure in the master cylinder… read more
AMEDEE
AMEDEE
AUTOMOTIVE TECHNICIAN
Vocational, Technical or Trade Scho
9,105 satisfied customers
Lost power on way home from work..popping and backfiring
lost power on way home from work..popping and backfiring ....looked like exaust coming out or air filter...parked it now wont start.....02 4.3 … read more
Tim&#039;s Auto Repair
Tim's Auto Repair
mechanic
High School or GED
8,847 satisfied customers
My 2008 Chevy impala only moves in reverse. Putting
I️t won't catch any one my gears. Not 1,2, or 3. I️ had to drive home backwards… read more
Chris (aka - Moose)
Chris (aka - Moose)
Vocational, Technical or Trade Scho
108 satisfied customers
Rear wiper not working. Fuses are good and fluid is working.
Rear wiper not working JA: Have you checked the fuses? Do you know if there is power to the wiper motor? Customer: Yes fuses are good and fluid is working JA: What is the model/year of your Chevy? Cus… read more
Don - Mo Lurch
Don - Mo Lurch
Auto Mech / Electronics
Vocational, Technical or Trade Scho
2,900 satisfied customers
2000 chevy pick up 3500 5.7 wont stay running unless I spray
2000 chevy pick up 3500 5.7 wont stay running unless I spray starting fluid I have 60 psi at fuel rail… read more
Pete
Pete
Independent Auto Technician
Vocational, Technical or Trade Scho
138 satisfied customers
Can't get new wiper motor to turn off. Changed all fuses and
yes ,changed all fuses and new switch started after going thru a car wash … read more
Mechanic01
Mechanic01
1,138 satisfied customers
15 duramax lml turns over and over scanner shows no oil
15 duramax lml turns over and over scanner shows no oil pressure cam position code and fuel rail press high buy bcm shows 12 codes so my question do i just figure a motor … read more
Chris (aka - Moose)
Chris (aka - Moose)
Vocational, Technical or Trade Scho
108 satisfied customers
Keep blowing fuse that feeds back light dash. now rear
keep blowing fuse that feeds back light dash. now rear running light are out blinkers work front light on but no rear running lights fuse will blow. What else is on that circuit? i believe fuse number… read more
GM Tech (Cam)
GM Tech (Cam)
Chevy Technician
Vocational, Technical or Trade Scho
15,249 satisfied customers
I have an 03 Chevy Cavalier coupe with a 5-speed. I need to
I have an 03 Chevy Cavalier coupe with a 5-speed. I need to check the slave cylinder, so I'm removing the transmission. This is a tight fit....I tried to remove the trans leaving the engine bolted to … read more
Dodge expert
Dodge expert
ASE MASTER TECH, REPAIR FACILITY OWNER
High School or GED
3,636 satisfied customers
When I go from in to reverse my back wheels drag. Good 70
Does not happen every time happens going from park to drive as well… read more
AMEDEE
AMEDEE
AUTOMOTIVE TECHNICIAN
Vocational, Technical or Trade Scho
9,105 satisfied customers
Evening, I have a 99 Gmc 4x4 Pickup L460E, I have no
Evening, I have a 99 Gmc 4x4 Pickup L460E, I have no speedometer reading, the Cruise light comes on but won't engage. I have replaced the Vss sensor on the tail shaft of the Transfercase. I have liter… read more
Dennis Gooch
Dennis Gooch
Master Technician
Automobile Technician
4 satisfied customers
Changed the rear brakes on my 1994 Geo Prizm and they won't
Changed the rear brakes on my 1994 Geo Prizm and they won't bleed out. … read more
Eric
Eric
Retired
N/A
14,436 satisfied customers
Have power to low beam but will not come on. 2010 tahoe.
Have power to low beam but will not come on JA: What is the model/year of your Chevy? Customer: 2010 tahoe JA: Are you fixing your Tahoe yourself? What have you tried so far? Customer: Bulbs relay and… read more
Peter Bagley
Peter Bagley
master technition
Vocational, Technical or Trade School
900 satisfied customers
I have a 09 chevy colorado LT 4 cyl 2wd. there is a code i
hi i have a 09 chevy colorado LT 4 cyl 2wd. there is a code i need to fix to pass deq. po411 need help to find out whats the problem.… read more
Gabriel Grey
Gabriel Grey
Master Service Technician
Associates
170 satisfied customers
I've been having a problem with my 2009 5.3L Suburban. Under
I've been having a problem with my 2009 5.3L Suburban. Under long and heavy braking, I will experience a drop in the RPMs, and the RPMs will bob up and down for a brief period. In worst cases, the RPM… read more
Eric
Eric
Retired
N/A
14,436 satisfied customers
Not every time but about 30% of the time it will grind
Not every time but about 30% of the time it will grind really loud when out in reverse stops when it's in neutral or park then you can put it back in reverse and it doesn't do it again trans pulls fin… read more
Dan
Dan
Automotive Technician
Vocational, Technical or Trade Scho
25 satisfied customers
I drove my 2013 Chevy Suburban early this morning after
I drove my 2013 Chevy Suburban early this morning after about 3miles it stared driving sluggish it felt like the engine was going to stall when I was breaking for a red light when the light turned gre… read more
Gabriel Grey
Gabriel Grey
Master Service Technician
Associates
170 satisfied customers
Windows won't go up/down in my 2005 Chevy Malibu. Checked
Windows won't go up/down in my 2005 Chevy Malibu. Checked the wiring and there is current, the motor is fine, replaced the switch and that didn't help. I was told it may be the relay (from a mechanic)… read more
Mechanic01
Mechanic01
1,138 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x