How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don - Mo Lurch Your Own Question
Don - Mo Lurch
Don - Mo Lurch, Auto Mech / Electronics
Category: Chevy
Satisfied Customers: 21013
Experience:  Chevrolet Cert., Heavy Line Mech, Race Shop Owner, Mobile Electronics.
1609972
Type Your Chevy Question Here...
Don - Mo Lurch is online now
A new question is answered every 9 seconds

Chevrolet Silverado 1500 Need a wiring diagram for 1999 silverado

This answer was rated:

Need a wiring diagram for 1999 silverado Z71 Push button front actuator

 

what is "Push button front actuator"??

 

are you refering toXXXXX

 

 

 

 

Customer: replied 6 years ago.
Yes i need the wirring diagram for the Front Differential Actuator . Push button 4x4

 

 

Here is what Chevrolet shows

 

graphic

 

graphic

 

graphic

 

 

 

 

 

Please keep in mind Just Answer is set up on an honor system.

I have sent the information you have requested.

PLEASE click ACCEPT so that I may get credit, thanks.

 

 

 

 

 

Customer: replied 6 years ago.
ok well still not seeing what i am looking for . There are Four wires on the harness that conects to the actuator . I need to know what wires do what... Maybe that is in the diagram but maybe the diagrams are to complex for me

 

Please review the 3rd diagram, as that shows the actuator & wiring
From that it goes to diagram 2

 

 

 

 

Please keep in mind Just Answer is set up on an honor system.

I have sent the information you have requested.

PLEASE click ACCEPT so that I may get credit, thanks.

Don - Mo Lurch and other Chevy Specialists are ready to help you
Customer: replied 6 years ago.
Yes after I looked at it closer i found that ... Thank you very much!

 

THANK YOU
Thanks for using J/A

Customer: replied 6 years ago.
Actuator (Brand new actuator) will not work checked all fuses. Is it possible to wire it direct to a switch and bypass it from the rest of the system? What could the problem possibly be?

 

Key on

Check for
Ground on Black wire
Voltage on Brown wire

 

Use of Dealer Scan Tool is needed to test Modules

 

graphic