Chevy

Chevrolet Repair Questions? Ask a Chevy Mechanic for Answers ASAP

Ask an Expert,
Get an Answer ASAP!

This answer was rated:

chevy: eng..trans..bolt..complete rear-end with 6 lugs & Disc brakes…

I have a chevy 1/2ton...
I have a chevy 1/2ton Stepside. I built a pre '87 350/350 eng/trans installed it and am driving it with complete sat. Problem; I have a 199 10 bolt,8.5 3.73 geared complete rear-end with 6 lugs & Disc brakes. Is it a bolt in swap? If not, what do I need to do?
Show More
Show Less
Ask Your Own Chevy Question
Answered in 4 hours by:
6/28/2010
JHoop
JHoop, Chevy Technician
Category: Chevy
Satisfied Customers: 5,446
Experience: 14 Year Engine Builder,16 years as a Tech HvyLine, Suspension, Electrical, Brakes, 6 Year Shop Owner
Verified
Hello , my name isXXXXX you for choosing justanswer.com.

It is a bolt in swat but the master cylinder will have to be upgraded to one for rear disc brakes.

If you have any more questions or need any diagrams, please don't hesisitate to ask If this answer helped you, please click ACCEPT.

If you have a deposit but do not click ACCEPT you will STILL be charged, but I don't get credit! Not clicking ACCEPT hurts the Techs that help you! Thanks, JHoop
JHoop
JHoop, Chevy Technician
Category: Chevy
Satisfied Customers: 5,446
Experience: 14 Year Engine Builder,16 years as a Tech HvyLine, Suspension, Electrical, Brakes, 6 Year Shop Owner
Verified
JHoop and 87 other Chevy Specialists are ready to help you
Ask your own question now
Customer reply replied 8 years ago
how can I change the 6 lug to 5 lug pattern To match the front weels? I don't want to have to buy new wheels if I can help it
Customer reply replied 8 years ago
I still need answer for the axle , wheel question. Thankyou for the help.<><
What year is the diff out of?

Your question said 199
Ask Your Own Chevy Question
Customer reply replied 8 years ago
1999
Got it.
Ask Your Own Chevy Question
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a chevy mechanicLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask JHoop Your Own Question
JHoop
JHoop
JHoop, Chevy Technician
Category: Chevy
Satisfied Customers: 5,446
5,446 Satisfied Customers
Experience: 14 Year Engine Builder,16 years as a Tech HvyLine, Suspension, Electrical, Brakes, 6 Year Shop Owner

JHoop is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was having a terrible problem with the wheel bearings on my 98 Chevy Cavalier and I suspect that using this website saved me plenty of time and money.

Todd LRochester NY

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

< Previous | Next >

Meet the Experts:

GM Tech (Cam)

GM Tech (Cam)

Chevy Technician

15,756 satisfied customers

GM Grand Master Technician 2007. 14 years experience.

Gary

Gary

Chevy Technician

9,642 satisfied customers

15 years GM master tech

Tim&#039;s Auto Repair

Tim's Auto Repair

mechanic

8,884 satisfied customers

Have owned a repair shop for 25 yrs.

Dave Nova

Dave Nova

Chevrolet Technician

7,092 satisfied customers

ASE Master Certification. GM World Class Certification

John

John

Master A.S.E Automotive technician

4,071 satisfied customers

A.S.E MasterTechnician A1-A8 w/L1,38 years experience General Motors Master Technician

Don - Mo Lurch

Don - Mo Lurch

Auto Mech / Electronics

2,953 satisfied customers

Chevrolet Cert., Heavy Line Mech, Race Shop Owner, Mobile Electronics.

Ron Z.

Ron Z.

- Chevy Tech -

2,836 satisfied customers

18+yrs experience. State Inspector and Chevy Diagnostics

< Previous | Next >

Related Chevy Questions
Chevrolet Z71 extended cab: Will a 1999 3/4 ton 12 bolt rear
Will a 1999 3/4 ton 12 bolt rear end fit a 1/2 chevy Z71? It has the same gears I'm pretty sure 3.73 but more leaf springs which if good for my application. However the rear axles have 8 lugs on them … read more
Tim&#039;s Auto Repair
Tim's Auto Repair
mechanic
High School or GED
8,884 satisfied customers
Chevrolet Silverado: I have an 87 Chevy truck, 1/2 ton with
I have an 87' Chevy truck, 1/2 ton with 6 lug axles. I blew up "Auburn Lockers" with 4:88 gears and want to replace with stock carrier. It has a 10 bolt Corporate rear and the "Ring-n-Pinion" 4:88 gea… read more
Chris (aka - Moose)
Chris (aka - Moose)
Vocational, Technical or Trade Scho
108 satisfied customers
1990 Chevrolet: an 8 bolt rear axle, but the front axle..diesel
Hi, I have a 1990 Chevrolet K2500 with an 8 bolt rear axle, but the front axle is 6 bolt. The engine is the 6.2L diesel. I believe it originally came with the 6 bolt in the rear end. What would it tak… read more
eauto
eauto
self employed
High School or GED
74 satisfied customers
93 1/2 ton Silverado 4x4 ( 350)...leaks..frond diff is broken
I have a 93 1/2 ton Silverado 4x4 ( 350). 200k miles, the rear axle needs a brake overhaul and the pinion has a little slop and leaks also I,m sure it could use wheel bearings. just found out the fron… read more
eauto
eauto
self employed
High School or GED
74 satisfied customers
2500 suburban: locking differentials..1993 chevy..torque
hello, I'm curious about installing locking differentials in my 1993 chevy 2500 suburban. No serious off-roading, but I want to know that I can get myself unstuck with positive wheel torque at all fou… read more
heavy_chevy_396
heavy_chevy_396
Vocational, Technical or Trade Scho
2,518 satisfied customers
what is the gear ratio on the rearend of 99 chevy suburban
what is the gear ratio on the rearend of 99 chevy suburban 1500 4x4 350 engine with 6 lugs bolt patern… read more
Dan
Dan
High School or GED
1,401 satisfied customers
I have an 87 Chev 1/2ton 4WD pick-up..rear end..bolt
I have an '87 Chev 1/2ton 4WD pick-up. The rear end grenaded. It had a 10 bolt, 4:11 rear end in it. Not realizing there might be a problem, I put a 12 bolt, 4:11 rear end (axle) under it. My friend s… read more
joeplow
joeplow
Retired-Disabled
Master Aamco
1 satisfied customers
I have a 1990 Chevy K2500 with a 3.73 (GT4) front differential
I have a 1990 Chevy K2500 with a 3.73 (GT4) front differential (8 lug wheel) and 5.7L. The actuator has been replaced and is working, but won't put the front diff into 4-wheel drive. The mechanic says… read more
eauto
eauto
self employed
High School or GED
74 satisfied customers
Chevy: a 1994..rear axle..assembly..bolt..crew cab
will a 1994-98 1/2 ton chevy rear axle assembly bolt on and work on a 2005 1500 crew cab truck… read more
mr.goodwrench
mr.goodwrench
High School or GED
25 satisfied customers
2006 chevy: 4x4 and Im going to change the gears out..bolt..rear end
I have a 2006 chevy 1/2 ton 4x4 and I'm going to change the gears out. I am supposed to have a 8.6" 10 bolt rear end. They say it should have disc brakes. If it is the factory rear end and has drum br… read more
Jay
Jay
Auto Mechanic
Vocational, Technical or Trade Scho
412 satisfied customers
2008 GMC: 10 bolt..slip..I get a 4.10 gears for this rear end?
I have a 2008 GMC Sierra SLE 1500 with the 10 bolt 8.5" gear. It has a 3.73 Eaton limited slip diff. Where can I get a 4.10 gears for this rear end? And where can I get it installed?… read more
GM Tech (Cam)
GM Tech (Cam)
Chevy Technician
Vocational, Technical or Trade Scho
15,756 satisfied customers
1989 chevy: I use a 14 bolt SF 6 lug from a C2500..K2500..cant find
I have a 1989 chevy K1500 with a 10 bolt rear that needs to be replaced. Can I use a 14 bolt SF 6 lug from a C2500 to replace it. I know one from a K2500 will work,but I cant find the what the differe… read more
diagman
diagman
Store leader
High School or GED
339 satisfied customers
I have a 10-bolt chevy rear end and I found this code
I have a 10-bolt chevy rear end and I found this code stamped in the axle tube on passenger side: XPK K211 1. Can you tell me what year model this is and what gear ratio I may find inside, also if it … read more
richardndawnc
richardndawnc
Auto Repair Shop Owner
Associate Degree
132 satisfied customers
got a 65 chevy truck i want to put power dics brake on the
got a 65 chevy truck i want to put power dics brake on the front has 6 lug what other vehicle can i use to get my parts.… read more
Dave Nova
Dave Nova
Chevrolet Technician
Associate Degree
7,092 satisfied customers
1955 chevy: ton..tranny and rear end that will at least peel rubber
My question is i have a 1955 chevy 1/2 ton pick up. im on a budget, what type of motor should i get along with tranny and rear end that will at least peel rubber. Mind you im not looking for the faste… read more
Bob
Bob
Vocational, Technical or Trade Scho
2,784 satisfied customers
1963 chevy: pickup..the rotors and calipers from the Z28..backing
I have a 1963 chevy c10 pickup that I''m installing the running gear from a 1989 IROC Z28. I want to use the truck front suspension with 2" dropped spindles but use the rotors and calipers from the Z2… read more
diagman
diagman
Store leader
High School or GED
339 satisfied customers
1986 cutlass supreme: a 1975 350 chevy..compression..cam..horsepower
i have a 1986 cutlass supreme with a stock 307 and 200 3speed auto. i would like to put a 1975 350 chevy with 10 to 1 compression medium cam and 355 horsepower in it. what do i need to do to make this… read more
frank
frank
Vocational, Technical or Trade Scho
1,892 satisfied customers
A 6 lug bolt pattern wheels on my 96 C1500..axles..drums..assy
I would like to use a 6 lug bolt pattern wheels on my 96 C1500 with a 5 lug bolt pattern. What parts and OE parts numbers, can I use to make the conversion,front disc,rear axles,drums,brake assy.… read more
frank
frank
Vocational, Technical or Trade Scho
1,892 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x