How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Michael Moore Your Own Question
Michael Moore
Michael Moore, GM MASTER/WORLD CLASS. ASE MASTER
Category: Chevy
Satisfied Customers: 2956
Experience:  ASE Master/GM WORLD CLASS/GM Master/GM ASEP/Dodge Gold/Mazda cert.
4232346
Type Your Chevy Question Here...
Michael Moore is online now
A new question is answered every 9 seconds

how do you replace a windshield washer pump on a 2006 impala

Resolved Question:

how do you replace a windshield washer pump on a 2006 impala
Submitted: 7 years ago.
Category: Chevy
Expert:  Michael Moore replied 7 years ago.
To replace the washer pump, you will need to remove the right front wheel and the plastic liner to gain access to the washer bottle. When you remove the liner the washer pump will be at the bottom of the washer bottle. Its not bolted in, it just pops off.


This is the left liner, the right comes off the same.


Object Number:(NNN) NNN-NNNN Size: MF



number 2 leads down to the pump.

Washer Pump Replacement

Object Number:(NNN) NNN-NNNN Size: SF


Customer: replied 7 years ago.
ok but once i get to that how can i tell if it is the pump and not the switch on the dash
Customer: replied 7 years ago.
how can i tell if it is the pump and not the switch
Expert:  Michael Moore replied 7 years ago.
There are 2 wires at the pump. You can use a test light across the 2 wires and have someone push in the washer switch. The test light should light up. More the likely its the pump and not the switch, we replace alot of pumps, hardly any switches but its always a good idea to check.
Michael Moore and 5 other Chevy Specialists are ready to help you