How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Z. Your Own Question
Ron Z.
Ron Z., - Chevy Tech -
Category: Chevy
Satisfied Customers: 18875
Experience:  18+yrs experience. State Inspector and Chevy Diagnostics
Type Your Chevy Question Here...
Ron Z. is online now
A new question is answered every 9 seconds

how do you replace a camshaft position sensor on a 2004 3.5L

Resolved Question:

how do you replace a camshaft position sensor on a 2004 3.5L Chevrolet Malibu?
Submitted: 7 years ago.
Category: Chevy
Expert:  Ron Z. replied 7 years ago.

The Camshaft Sensor is located at the top right hand side of the engine.


  • Disconnect the camshaft position (CMP) sensor electrical connector.
  • Remove the CMP sensor bolt.
  • Remove the CMP sensor.
  • Inspect the sensor O-ring for wear, cracks, or leakage if the sensor is not being replaced.


Ron Z. and 2 other Chevy Specialists are ready to help you