How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mazda Ed Your Own Question
Mazda Ed
Mazda Ed, Auto Service Technician
Category: Chevy
Satisfied Customers: 2223
Experience:  ASE Master Technician, Mazda Master Technician, GM and Ford factory trained. 15 years experience.
Type Your Chevy Question Here...
Mazda Ed is online now
A new question is answered every 9 seconds

Installing s14058 switch/commutateur interruptor on 2002 chev blazer

Customer Question

installing s14058 switch/commutateur interruptor on 2002 chev blazer
Submitted: 7 years ago.
Category: Chevy
Expert:  Mazda Ed replied 7 years ago.



Pull the tilt steering lever straight out. It takes a bit of force and may require a screwdriver to lever it out. Then remove the 2 screws from the bottom cover and tilt the cover down while pushing toward the front of the vehicle to release it off the pins. Then with that cover removed, remove the 2 screws holding the upper cover in place. You will see them enter from the bottom.