How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don - Mo Lurch Your Own Question
Don - Mo Lurch
Don - Mo Lurch, Auto Mech / Electronics
Category: Chevy
Satisfied Customers: 21013
Experience:  Chevrolet Cert., Heavy Line Mech, Race Shop Owner, Mobile Electronics.
1609972
Type Your Chevy Question Here...
Don - Mo Lurch is online now
A new question is answered every 9 seconds

what year would block casting #10066036 be and would it be

Resolved Question:

what year would block casting #10066036 be and would it be able to handle 435hp edelbrock performance top end kit. engine has approx 30,000 miles on and runs good no noise
Submitted: 7 years ago.
Category: Chevy
Expert:  Don - Mo Lurch replied 7 years ago.

10066036 =
...350......1984 & up.....2 or 4 Bolt Mains (need to look)...

Target Master/Goodwrench crate motor, 2-piece rear seal, "Hecho en Mexico" (Made in Mexico) sold in GM Parts

 

While most of these engines were built for replacing stock motors & sold thru Parts, this is "not" the engine I would spend money on, for performance.

Try to find a Block / Engine in the late 60's to early 70's with 4 bolt mains

 

 

Don - Mo Lurch and other Chevy Specialists are ready to help you