How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Chevy Technician
Category: Chevy
Satisfied Customers: 29520
Experience:  GM Grand Master Technician 2007. 14 years experience.
Type Your Chevy Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

My 2004 GMC ENVOY (6 cylinder) has set code P0410 secondary

Resolved Question:

My 2004 GMC ENVOY (6 cylinder) has set code P0410 secondary air injection. What causes this? Are there specific parts to replace to correct this. I recently replaced the primary O2

Bob Peck
Submitted: 7 years ago.
Category: Chevy
Expert:  GM Tech (Cam) replied 7 years ago.
Welcome. Do you hear the pump running at all under the truck when you first start the truck?
Customer: replied 7 years ago.
The compressor for the rear stabilization runs until that system is pressurized and I can hear a relay actuate. Other than that no specific sounds.

Expert:  GM Tech (Cam) replied 7 years ago.
Ok. I am not talking about the rear air suspension, I am talking about the air pump. Check the fuse for the air pump in position 56. It is a 60 amp fuse. Also take a line off the pump and see if there is water there. If so, replace the pump.
GM Tech (Cam) and 4 other Chevy Specialists are ready to help you