How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Z. Your Own Question
Ron Z.
Ron Z., - Chevy Tech -
Category: Chevy
Satisfied Customers: 18867
Experience:  18+yrs experience. State Inspector and Chevy Diagnostics
18617752
Type Your Chevy Question Here...
Ron Z. is online now
A new question is answered every 9 seconds

what is the torque spec for 2003 chevy 1/2 ton 4WD wheel bearing ?

Resolved Question:

what is the torque spec for 2003 chevy 1/2 ton 4WD wheel bearing ?
Submitted: 8 years ago.
Category: Chevy
Expert:  Ron Z. replied 8 years ago.

Tighten the wheel hub to knuckle bolts to 180 N.m (133 lb ft).

Install the nut and washer retaining the wheel drive shaft assembly to the wheel hub and bearing. Tighten Tighten the nut to 240 N.m (177 lb ft).

Ron Z. and other Chevy Specialists are ready to help you