How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JOHN aka Eauto Your Own Question
JOHN aka Eauto
JOHN aka Eauto, The Car Guy
Category: Chevy
Satisfied Customers: 16048
Experience:  ase tech
6149662
Type Your Chevy Question Here...
JOHN aka Eauto is online now
A new question is answered every 9 seconds

how do i remove the door panel from a 88 chevy s10 pickup to

Customer Question

how do i remove the door panel from a 88 chevy s10 pickup to repair the window? i cannot roll the window up or down. =( any help would be great as i cannot locate my repair manual! ahh!!!!
Submitted: 8 years ago.
Category: Chevy
Expert:  JOHN aka Eauto replied 8 years ago.
manual or power window?
Customer: replied 8 years ago.
manual window
Expert:  JOHN aka Eauto replied 8 years ago.
Door Trim Panel Replacement
Notes

Front Door Trim Panel

Front Door Trim Panel Components

Tools


Tool Required:
J-21104 Trim Pad Remover.

REMOVE OR DISCONNECT

  1. Door pillar molding.
  2. Window regulator handle.
  3. Armrest.
  4. Power window switch, if used.
  5. Trim panel. Pry the fasteners from their seats using J-21104.

INSTALL OR CONNECT

  1. Trim panel to the door.
  2. Armrest.
  3. Window regulator handle.
  4. Power window switch, if used.
  5. Door pillar molding.

 

Customer: replied 8 years ago.
thank you john for the diagrams.. they do help. humor me, im not that mechanically inclined. i had taken off the door garnish molding, and the screws in the arm rest, but couldnt figure out how to take off the window regulator handle. the truck is not in the best shape, and the trim panel is partially off. i dont have the special tool to take that all the way off but couldt even get to that point. how do i take off the door handle and window regulator handle? can i do this with just a screwdriver?
Expert:  JOHN aka Eauto replied 8 years ago.
Yes ther is a clip you need topop the clip off the may a tool for it but if you look you should be able topop it off with a screw driver
Customer: replied 8 years ago.
i dont see the clip in the diagrams... how can i recognize it? *so sorry, im trying to do this on my own and i just dont know what im doing, really appreciate your help*
Customer: replied 8 years ago.
i think i found a picture of it. thank you for all your time.
Expert:  JOHN aka Eauto replied 8 years ago.
dont forget to hit accept