How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John
John, Master A.S.E Automotive technician
Category: Chevy
Satisfied Customers: 9176
Experience:  A.S.E MasterTechnician A1-A8 w/L1,38 years experience General Motors Master Technician
6408229
Type Your Chevy Question Here...
John is online now
A new question is answered every 9 seconds

instrument cluster replacement 2004 Venture

Resolved Question:

instrument cluster replacement 2004 Venture
Submitted: 8 years ago.
Category: Chevy
Expert:  John replied 8 years ago.

HelloCustomer

Here are instructions on reolacing a cluster in a 2004 Venture.

 

Instrument Cluster Trim Panel Replacement

  1. Remove the IP insulator. Refer to one of the following procedures:
  2. Remove the knee bolster.
  3. Remove the IP accessory trim plate. Position the tilt steering wheel to the lowest position.
    Object Number: 318184  Size: SH
  4. Pull on the IP cluster trim plate in order to release the clips that secure the IP cluster trim plate to the instrument panel.

    Begin near the headlamp switch and work toward the center of the vehicle IP cluster trim plate.

  5. Remove the IP cluster trim plate from the instrument panel.


    Object Number: 318184  Size: SH

  1. Position the IP cluster trim plate to the instrument panel.
  2. Align the IP cluster trim plate clips to the slots in the instrument panel.
  3. Push the IP cluster trim plate clips into the slots in the instrument panel until fully seated.
  4. Reposition the steering column to the original position.
  5. Install the knee bolster.
  6. Install the IP insulator. Refer to one of the following procedures:
  7. Install the IP accessory trim plate.
John and 2 other Chevy Specialists are ready to help you
Customer: replied 8 years ago.
got it done...but now radio says locked