How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary, ASE Certified Technician
Category: Chevy
Satisfied Customers: 298
Experience:  ASE Master Truck Technician,24 Years GM Shop Foreman,Fully Trained GM Trucks Light and Heavy.
Type Your Chevy Question Here...
Gary is online now
A new question is answered every 9 seconds

remove 1500 silverado ignition housing and key tumbler

Customer Question

remove 1500 silverado ignition housing and key tumbler
Submitted: 8 years ago.
Category: Chevy
Expert:  Gary replied 8 years ago.
HiCustomer In order to remove the lock cyl, you have to remove the upper column covers, then , with the battery disconnected, you turn the key partially into the crank position, and take a small pick, and insert it into the hole on top of the ign. housing. Then the lock cyl will come out. The air bag coil, and combo switch need to be remove to gain access to the housing bolts. Remove the ign housing bolts, and unhook the cable, and the housing will come off. Good luck...Gary