Chevy

Chevrolet Repair Questions? Ask a Chevy Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Chevy Questions
I have a 88 chevy camaro z28 iroc but it's got a 79 350
I have a 88 chevy camaro z28 iroc but it's got a 79 350 motor in it and it started running weird on me doesn't wanna stay running and fouled the plugs out I got a timing light but I don't know how to … read more
Gary
Gary
Gold Certified GM Technician
Vocational, Technical or Trade School
2,996 satisfied customers
I have a 79 z28 Camaro would having a bad ignition make the
I have a 79 z28 Camaro would having a bad ignition make the car died after a few minutes once it had been cranked up. … read more
Lance Answer
Lance Answer
Master Auto Technician
Vocational, Technical or Trade School
857 satisfied customers
I have an 1988 camaro irocz 350 multi-port tune injection
I have an 1988 camaro irocz 350 multi-port tune injection L98. Wondering what the stock ECU/ECM number is? … read more
Daniel Chaidez
Daniel Chaidez
Technician
Diploma
3,994 satisfied customers
I'm building a 383 and won't too know if I'm using the right
I'm building a 383 and won't too know if I'm using the right stuff like can do forth so the block 350lod school 010 40 over the heads 205cc.64cc aluminum the piston are scorpion 40 the cam is a Howard… read more
Gary
Gary
Gold Certified GM Technician
Vocational, Technical or Trade School
2,996 satisfied customers
Chevy Camaro (1967): 1967 Camaro, all in & out rebuilt over
1967 Camaro, all in & out rebuilt over 10 years. PROBLEM - VIBRATION UPON STARTING, NEUTRAL.....CAN STILL FEEL THRU PEDALS, STEERING WHEEL & GEARSHIFT I have tried thru process of elimination, every p… read more
Roy Belding
Roy Belding
7,693 satisfied customers
Want to build a 454 chev engine for mud drags...as much power
Want to build a 454 chev engine for mud drags. need to develope as much power as I can in 100 to 200 ft. What are some suggestions. Bore, pistons, rods, heads, intake, carb, cam, etc.… read more
Virtual Wrench
Virtual Wrench
Owner of LJ Auto Repair 37 years
Associate Degree
14,420 satisfied customers
Low power..25 mph and jump in it it will put you back in the seat what
i know small block is not a low end engine for the most part but my problem is real low power it cant seam to leave with any force it realy just lays down if you have the car rolling at 25 mph and jum… read more
Ted G.
Ted G.
Sales Manager
Vocational, Technical or Trade Scho
5,692 satisfied customers
1974 chevy: edelbrock..it lacks power until i hit 85mph..vacuum..carb
I have a 1974 chevy C-10 that has a 350ci with a edelbrock 1406 on it. i just recently put a 700r4 on it and now it lacks power until i hit 85mph and then the engine comes to life and halls ass. Could… read more
jazzmaster
jazzmaster
LEAD AUTO TECH
Vocational, Technical or Trade Scho
2,873 satisfied customers
1979 camaro z28: with edlebrock intake..carb..flat top pistons..mile
I have 1979 camaro z28 350 with edlebrock intake and holley double pumper carb. All seems to be stock,flat top pistons cupped for valve clearance,bored 5 thousandths over. Car was set up for quarter m… read more
Tim's Auto Repair
Tim's Auto Repair
mechanic
High School or GED
9,477 satisfied customers
Pasenger side-front engine block extruding metal..water pump
I found these #'s on pasenger side-front engine block extruding metal by water pump connection, I need know what make model year engine is from? top of plate is - 3776 middle of plate is- T032oDN bott… read more
richardndawnc
richardndawnc
Auto Repair Shop Owner
Associate Degree
132 satisfied customers
79 350 out of a z-28. Am rebuilding it and want to make around 450hp
I have a 79' 350 out of a z-28. Am rebuilding it and want to make around 450hp, what parts do i need?… read more
tech364
tech364
Vocational, Technical or Trade Scho
196 satisfied customers
be the best carb and intake..lift cam, aluminum heads2.055int/1.6ext
what would be the best carb and intake for a 350 bored 60 over with a .477 lift cam, aluminum heads2.055int/1.6ext 64cc 210 intake runners… read more
Davo
Davo
Master Auto Tech/manager of auto shop
Vocational, Technical or Trade Scho
1,644 satisfied customers
69 camaro: Camshaft..Valves..Crank...010/.010 and the Cylinders
Hello I just installed a 350/350 motor in my 69 camaro the Motor specs are as Fallows ,Camshaft ( 222 @ .050 ") with .477 Lift the Valves are 1.94 x1.50 with Hundred pounds Springs , the Crank was reg… read more
GM Master Tech 01
GM Master Tech 01
GM certified diesel master tech
226 satisfied customers
super: 2800 lbs, bert trans, 6.20, 6.33, 6.50 gears..heads..springs
I am just getting back into racing after 6 years out. I ran a wissota super stock, 2800 lbs, bert trans, 6.20, 6.33, 6.50 gears. I ran a 355 sbc now we can run a 360 , can you tell me how to get to 36… read more
camarochris
camarochris
tech
Over 10 years of Personal Experienc
34 satisfied customers
1970 camaro: a 70 350 LT-1, so I have a good lead on a block
Hello, I have recently bought a 1970 camaro Z-28 for my father as it is his dream car. The car seems sound enough for a thorough recondition, but it doesn''t have an engine. My dad always had his hear… read more
Carl King
Carl King
Sr Network Engineer
Vocational, Technical or Trade Scho
84 satisfied customers
A 350 4 bolt main engine all new parts except crank and rods..pistons
Hi,my name is XXXXX XXXXX attempted to build a 350 4 bolt main engine all new parts except crank and rods. 10.1 forged pistons 0.30 new rings cam lunati voodo 525 lift and lifters roler tip rockers st… read more
Dan
Dan
Auto Technician
Associate Degree
350 sb 4 bolt main bored .60 over...rods..pistons..compression
i have a 350 SB 4 bolt main Bored .60 over. i have rods that are polished and trude. pistons are 11 to 1 ratio on compression. the intake is a holly high rise open flow. the cam is a nice size not sur… read more
ase_master327
ase_master327
Owner & Student
High School or GED
3,214 satisfied customers
Marine: I bought a used 5.7L, vortec v-8 to rebuild for my truck
I bought a used 5.7L, vortec v-8 to rebuild for my truck. I was told it was a crate engine made for marine use. with less than 10 hours on the motor, it was flooded with water. the engine is in good c… read more
cyberwrench
cyberwrench
Vocational, Technical or Trade Scho
22 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was having a terrible problem with the wheel bearings on my 98 Chevy Cavalier and I suspect that using this website saved me plenty of time and money.

Todd LRochester NY

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

< Previous | Next >

Meet the Experts:

GM Tech (Cam)

GM Tech (Cam)

Chevy Technician

16,931 satisfied customers

GM Grand Master Technician 2007. 14 years experience.

Gary

Gary

Chevy Technician

9,659 satisfied customers

15 years GM master tech

Tim&#039;s Auto Repair

Tim's Auto Repair

mechanic

9,477 satisfied customers

Have owned a repair shop for 25 yrs.

Dave Nova

Dave Nova

Chevrolet Technician

7,092 satisfied customers

ASE Master Certification. GM World Class Certification

Chris (aka-Moose)

Chris (aka-Moose)

Technician

3,187 satisfied customers

24 years of experience diagnosing & repairing

Jerry Newton

Jerry Newton

Chevy Technician

2,804 satisfied customers

ASE Master Technician, L1, Master GM Technician. Over 20 years of bumper to bumper GM experience.

Mike S.

Mike S.

Chevy Mechanic

2,317 satisfied customers

ASE Certified Master Technician

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x