How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Scott K Your Own Question
Scott K
Scott K, ASE Master Tech/Instructor
Category: Chevy
Satisfied Customers: 1569
Experience:  20 yrs Experience; GM factory Training ASE Master Certified with L1 advanced engine diagnostics
Type Your Chevy Question Here...
Scott K is online now
A new question is answered every 9 seconds

How do i set the distributor on a chevy 350 with a TBI

This answer was rated:

No Comment Added

The distributor is "stabbed" in with cyl#1 on compression stroke Top dead center with the rotor pointing at the #1 plug tower on the distributor cap.

Cylinder #1 Plug tower is the one in line with the coil tower.

Then the remaining cylinders a routed in a clockwise rotation form there 1-8-4-3-6-5-7-2.



Scott K and 6 other Chevy Specialists are ready to help you