How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Triston Your Own Question
Triston
Triston, MASTER ASE CERTIFIED
Category: Chevy
Satisfied Customers: 1616
Experience:  10 YRS. EXP. ASE CERTIFIED SPECIALIZE IN ALL ELECTRICAL AND A/C ALSO AND ENGINE PERFORMANCE
10186415
Type Your Chevy Question Here...
Triston is online now
A new question is answered every 9 seconds

2002 Chevy Impala: removing..replacing..a front bumper cover

This answer was rated:

Is there a specific fastener removal sequence that should be used when removing and replacing a front bumper cover on a 2002 Chevy Impala?

no there is no seauence. i hope i helped and please accept if satisfied. thanks T-MAN


Object Number: 457533  Size: SH
Click here for detailed picture of above imageidth=

  • Remove the front fender liners. Refer to Front Fender Liner Replacement in Body Front End.
  • Remove the headlamps. Refer to Headlamp Assembly or Headlamp Bulb and/or Cornering, Sidemarker, Park, Turn Signal Bulb Replacement in Lighting Systems.
  • Remove the fog lamps, if equipped. Refer to Front Fog Lamp Replacement in Lighting Systems.
  • Remove the nuts from the front bumper fascia at the fender.
    Object Number: 457537  Size: SH
    Click here for detailed picture of above imageidth=
  • Remove the push-in retainers from the upper front bumper fascia support using J 38778 .
    Object Number: 457535  Size: SH
    Click here for detailed picture of above imageidth=
  • Remove the screws from the front bumper fascia at the lower support.
  • Remove the front bumper fascia from the vehicle.
  • Remove the grille from the front bumper fascia. Refer to Fascia Grille Replacement .
  • Remove the front bumper fascia outer support. Refer to Front Bumper Fascia Outer Reinforcement Replacement .
  •  

    Object Number: 738910  Size: SH

    Object Number: 182389  Size: SH

    Object Number: 537687  Size: SH


    Object Number: 458212  Size: SH
    Click here for detailed picture of above imageidth=

  • Remove the screw from the fog lamp.
  • Remove the fog lamp from the front bumper fascia.
    Object Number: 458213  Size: SH
    Click here for detailed picture of above imageidth=
  • Disconnect the electrical connector from the fog lamp bulb.
  • Remove the fog lamp bulb, turning counterclockwise.
  • Triston and 2 other Chevy Specialists are ready to help you