How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Eric Your Own Question
Eric, Automotive Repair Shop Manager
Category: Chevy
Satisfied Customers: 32343
Experience:  20+ yrs. experience as repair shop manager and technician.
Type Your Chevy Question Here...
Eric is online now
A new question is answered every 9 seconds

2000 chevy: i changed my spark plugs..10 blazer..firing order

Customer Question

i changed my spark plugs in my 2000 chevy s-10 blazer. i double checked the firing order and everything is okay. but when i try to start the blazer, it seems like it''s not getting anything. it''s just turning over again and again. prior to me changing the spark plugs and wires, the blazer was mis firing and a mechanic told me that i needed to change my plugs and wires. i have gotten a block test on it and it passed so im good there. what do i do? please help!!!
Submitted: 9 years ago.
Category: Chevy
Expert:  Eric replied 9 years ago.


Ok, first, look at diagram below and double checking the firing order:


If firing order is correct, next you need to check that connections at plugs and distributor and coil are tight. If they are secure, check for spark from coil to the distributor.