How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bob Your Own Question
Bob
Bob, Auto Tech
Category: Chevy
Satisfied Customers: 4087
Experience:  Plus 40 years GM, over 30 certified with Chevrolet, ASE certified Master Tech. (Expired, Retired)
2210118
Type Your Chevy Question Here...
Bob is online now
A new question is answered every 9 seconds

I can not find where the blower motor is located on my 93 corsica

Customer Question

I can not find where the blower motor is located on my 93 corsica
Submitted: 9 years ago.
Category: Chevy
Expert:  Bob replied 9 years ago.

Hello, the information posted below should help you. Thanks

1990-96 Vehicles

  1. Disconnect the negative battery cable.

  2. For 3.1L engines, perform the following:

    1. Remove the serpentine drive belt.

    2. Remove the alternator from the vehicle.

  3. Detach the electrical connection(s) from the blower motor.

Click image to see an enlarged view
Fig. 3: Unplug the blower motor electrical connection(s)

 

  1. Disconnect the motor cooling tube.

  2. Remove the motor retaining bolts/screws, then remove the motor and fan assembly.

Click image to see an enlarged view
Fig. 4: Unfasten the blower motor mounting bolts/screws ...

 

Click image to see an enlarged view
Fig. 5: ... then remove the blower motor and fan assembly from the vehicle

 

On 1991-96 models, the blower motor and fan is serviced as an assembly.

  1. If necessary, remove the nut from the blower motor shaft, then separate remove the fan from the motor.

To install:

  1. Position the fan onto the blower motor shaft, then install the retaining nut.

  2. Install the blower motor assembly, then secure with the retaining screws.

  3. Connect the motor cooling tube.

  4. Attach the electrical connection(s) to the blower motor.

  5. On vehicles equipped with the 3.1L, perform the following:

    1. Install the alternator.

    2. Install the serpentine drive belt.

  6. Connect the negative battery cable, then check for proper blower motor operation.