How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Carl King Your Own Question
Carl King
Carl King, Classic Chevy man
Category: Chevy
Satisfied Customers: 149
Experience:  33 years experience in classic/muscle cars. Classic Chevy from 55-72.
Type Your Chevy Question Here...
Carl King is online now
A new question is answered every 9 seconds

What size are the starter bolts for a chevy 350 length,

Customer Question

there are two bolts that bolt on your starter. What size are the starter bolts for a chevy 350? length, diameter, metric or standard
Submitted: 10 years ago.
Category: Chevy
Expert:  Carl King replied 10 years ago.
Hi Kevin,

These are standard sized bolts. I don't think you should use anything but the correct bolts. You can get a set from any parts place, they are fairly standard. There are 2 different sets. One set has a short bolt and the other set use 3 long bolts.

These bolts are knurled around the shaft to allow them to function as a centering device/shim when tightened down. If you use a regular bolt, you will not center/shim the starter and you will wind up destroying your ring gear or starter drive. Probably both.