How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bob Your Own Question
Bob, Auto Tech
Category: Chevy
Satisfied Customers: 4087
Experience:  Plus 40 years GM, over 30 certified with Chevrolet, ASE certified Master Tech. (Expired, Retired)
Type Your Chevy Question Here...
Bob is online now
A new question is answered every 9 seconds

Do you have to re pressureize the fuel line once you replace it

Customer Question

do you have to re pressureize the fuel line once you replace it
Submitted: 10 years ago.
Category: Chevy
Expert:  Bob replied 10 years ago.

When you have the new one on, just turn the key on and wait a minute, the electric fuel pump will prime the system.

Removal Procedure
  1. Remove the fuel filler cap.
    Object Number: 255018  Size: SH

  2. Remove the fuel feed nut and plastic quick connect fitting from either side of the filter. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
    Object Number: 331867  Size: SH

  3. Remove the clamp bolt.
  4. Remove the filter and the clamp from fuel lines.
    Object Number: 331868  Size: SH
  5. Remove the clamp from filter.