How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bart Your Own Question
Bart, GM Master tech
Category: Chevy
Satisfied Customers: 136
Experience:  20 Years Gm Auto Tech All current gm training GM Master tech ASE Master tech All electrical problems
Type Your Chevy Question Here...
Bart is online now
A new question is answered every 9 seconds

91 GMC: tilt../>so i tore it all apart and tightened up 4 bolts that

Customer Question

I have a 91 GMC TK. The tilt stearing wheel was getting very loose.
so i tore it all apart and tightened up 4 bolts that was loose. (lock tited and all) not its all back together and i have not power! any where, lights, dome, instrument, nothing at all the key turns on and off, but no power, I 've checked the battery, its good,checked the wiriing down the stering collum and its pluged in. Im at a loss
can you help?
Submitted: 10 years ago.
Category: Chevy
Expert:  Bart replied 10 years ago.
Does it feel like the key cylinder is connected to switch because it is touchy geting the rack actuator linkage in place when reassembling column