How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Davo Your Own Question
Davo, Master technician
Category: Chevy
Satisfied Customers: 3253
Experience:  ASE Master Technician also L1 Advanced Engine Performance Specialist
Type Your Chevy Question Here...
Davo is online now
A new question is answered every 9 seconds
This answer was rated:

Chevy cobalt: I want to take the rear bench seats

I want to take the... Show More
I want to take the rear bench seats out of my chevy cobalt to clean them. How so i do start?
Show Less
Ask Your Own Chevy Question
Are you removing the back part and the bottom part?What year is the car?
Customer reply replied 10 years ago.
yea both parts. 2007

Rear Seat Cushion Replacement Just pull up on the front hard and it will pop loose.

Object Number:(NNN) NNN-NNNN Size: LF


Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .


Cushion, Rear Seat

Rear Split Folding Seat Back Replacement

Removal Procedure

    Object Number:(NNN) NNN-NNNN Size: SH
  1. Pull the release handles for the rear split folding seat backs located inside the rear compartment opening.
  2. Fold down the split folding seat backs slightly to release the seat back from the seat back latch.
  3. With a flat-bladed tool (2) release the retainer (3) for the pivot bolt on the latch assembly.
  4. Lift up the seat back (1). This will disengage the pivot bolt (3) from the latch assembly.
    Object Number:(NNN) NNN-NNNN Size: SH

  5. Slide the outboard side of the seat back (1) towards the center of the vehicle. This will remove the seat back from the center pivot pin (2) on the latch assembly.
  6. Remove the seat back from the vehicle.
Customer reply replied 10 years ago.
And of cousrse i have to remove all the plastic?
If it is in the way yes you will.You could clean them while still in the car if you use upholstery cleaner spray.That would save a pile of extra work.
Customer reply replied 10 years ago.
I'm having trouble with the bottom bench. Do I just need to pull harder?
It should come out.There are snap clips that hold it in.