How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Auto Mech / Electronics
Category: Chevy
Satisfied Customers: 20958
Experience:  Chevrolet Cert., Heavy Line Mech, Race Shop Owner, Mobile Electronics.
Type Your Chevy Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

How do I remove the factory radio in a 2006 Chevy Colorado ...

Customer Question

How do I remove the factory radio in a 2006 Chevy Colorado so I can install a rockford fosgate sound system?
Submitted: 10 years ago.
Category: Chevy
Expert:  Don 'Mo Lurch' replied 10 years ago.


Insert a dash trim removal tool or Thin Blade behind the trim bezel, above the right air vent.
Pry outward to release the retainer clip.
Work the removal tool counterclockwise around the bezel until all clips are released.
Disconnect the wire harness on the back side of the bezel.
Set bezel aside.
Remove 3 or 4 7mm Screws retaining Radio.
Remove Radio & Unplug Radio Harness