How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask William Your Own Question
William, Auto Technician
Category: Chevy
Satisfied Customers: 284
Experience:  7 ASE Certifications, Undercar Specialist, 20+ years exp.
Type Your Chevy Question Here...
William is online now
A new question is answered every 9 seconds

how to install a tachometer in a 95 chevy s10

Customer Question

I would like to install a tachometer in my 95 chevy s10 5 speed. I need to know where to connect the wires.
Submitted: 10 years ago.
Category: Chevy
Expert:  William replied 10 years ago.
To be thorough, the gauge light and accessory power can be attached to the fuse block, the ground at a suitable grounding point, virtually anywhere metal. For the part of the question you may have the most emphasis on, the signal wire, you can run the signal wire through the firewall, to the ignition coil. Locate the white wire and shave off a little insulator so you can wrap the signal wire to it, wrap in electrical tape. If you have any more questions regarding this, let me know.