How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim Basham Your Own Question
Tim Basham
Tim Basham, ASE Certified Master Technician
Category: Chevy
Satisfied Customers: 743
Experience:  30 years multi line tech ASE cert master tech ASE engine machinist, 9 years GM dealer exp.
Type Your Chevy Question Here...
Tim Basham is online now
A new question is answered every 9 seconds

1987 chevy S10: timing marks..with a 2.8 dead center

Customer Question

What is the timing marks on a 1987 chevy S10 with a 2.8 V6. How many degrees before or after top dead center
Submitted: 11 years ago.
Category: Chevy
Expert:  Tim Basham replied 11 years ago.

I beleive each mark is 2 degrees I cannot find anything that states this on the 2.8. I attached a diagram and instructions for setting timing.