How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Davo Your Own Question
Davo
Davo, Master technician
Category: Chevy
Satisfied Customers: 3253
Experience:  ASE Master Technician also L1 Advanced Engine Performance Specialist
112340
Type Your Chevy Question Here...
Davo is online now
A new question is answered every 9 seconds

No Comment Added

Customer Question

No Comment Added
Submitted: 11 years ago.
Category: Chevy
Expert:  Davo replied 11 years ago.

Radio/Audio System Operation


Setting the Clock for Systems without Radio Data Systems

Press and hold the HR or MIN arrow for two seconds. Then press the HR arrow until the correct hour appears. Press and hold the MIN arrow until the correct minute appears.


Setting the Clock for Systems with Radio Data Systems

Press and hold HR and MIN for two seconds. Then press and hold HR until the correct hour appears. AM or PM Will appear on the display. Press and hold MN until the correct minute appears. The clock may be set with the ignition off. The clock symbol will appear on the display in time-set mode.


To set the clock to the time of a station that broadcasts Radio Data Systems (RDS) information, press and hold HR and MN at the same time for two seconds until UPDATED and the clock symbol appear on the display. If the time is not available from the station, NO UPDAT will appear on the display instead.