Car

Ask a mechanic online and get answers to your car questions

Connect one-on-one with {0} who will answer your question

Related Car Questions
The fuel pressure gauge i rented does not have a valve.
The fuel pressure gauge i rented does not have a valve. Service procedures i have call for relieving system with valve on tool after disconnecting battery and several componet's electrical connectors.… read more
EricFromCT
EricFromCT
Auto Technician
6,371 satisfied customers
Blazer: 4.3L..the last year I have lost three fuel pumps
I have a 1997 S_10 Blazer with a 4.3L engine with 143k miles. In the last year I have lost three fuel pumps. The engine runs rough when first started but once warmed up runs well. After the last pump … read more
Eric
Eric
Retired
N/A
48,053 satisfied customers
93 gmc safari awd will not start. has started fine when it
93 gmc safari awd will not start. has started fine when it was warmed up. replaced fuel pump, egr valve and spark plugs. I get spark at the plug, and I know the fuel pump works fine because it started… read more
Golden Wrench
Golden Wrench
Shop Manager, Automotive Tech Consultant
Vocational, Technical or Trade Scho
240 satisfied customers
91 sierra: gmc..v8..There is a clicking/buzzing sound coming
I have a gmc 91 sierra with a 5.7 liter v8. There is a clicking/buzzing sound coming out of the throttlebody. It starts out quiet and then as engine warms up it becomes louder. Does not seem to affect… read more
Your Auto Inspector
Your Auto Inspector
ASE Certified Technician/Advisor/Parts
Bachelor's Degree
2,873 satisfied customers
97 Tahoe: replaced battery..connectors..positive side..turnover
I replaced battery and battery connectors on positive side of 97 Tahoe. But it still just rotates sometimes tries to turnover but does not?… read more
Amedee
Amedee
Former ASE Master Tech
Vocational, Technical or Trade Scho
2,912 satisfied customers
1996 GMC: V6..It idles smooth, it revs up fine and it accelerates
1996 GMC Jimmy 4.3L V6: The engine has a consistant miss when holding a constant speed. It idles smooth, it revs up fine and it accelerates great. Compression test was good. New spark plugs made no di… read more
Dan
Dan
Auto Technician
Associate Degree
my 2002 chevy blazer randomly stalls on me ill be ...
my 2002 chevy blazer randomly stalls on me ill be driving and the rpm s will drop then i let off the gas and it comes back up then i hit the gas again and it dies i let it sit for a while and it runs … read more
Dan
Dan
Auto Technician
Associate Degree
4 Ford: my 2005..cools down..gages and indicators indicate normal.
In my 2005 6.0 ford 3/4 Ford truck when the engine gets warmed up the engine will not start,just turns over. After the engine cools down it will start. All gages and indicators indicate normal. I t ru… read more
Larry
Larry
Technical Editor
Bachelor's Degree
718 satisfied customers
2000 GMC: starts hard..sitting..hesitates..it will try to stall
I have a 2000 GMC JIMMY. I t starts hard in the morning after sitting all night. Once it starts it will either run perfect or hesitates and you can not step on the gas because it will try to stall. I … read more
Dan
Dan
Auto Technician
Associate Degree
Yukon: Fuel Pressure Regulator..the Throttle Body (..valve cover
I''ve been having trouble starting my 1998 5.7 liter Yukon in the morning and I believe it is the Fuel Pressure Regulator. I have been told this part is on the Throttle Body (on the exterior of the en… read more
Jerry
Jerry
Master Mechanic
Vocational, Technical or Trade Scho
2,181 satisfied customers
1995 chevy s10: engine block..pickup..4cyl..the problem or some seal
i have a fuel leak from the engine block right where the fuel regulator is on a 1995 chevy s10 pickup 4cyl 2.2L and need to know if it is the fuel regulator that is the problem or some seal??… read more
Mike V.
Mike V.
technician
Subaru and Nissan factory training.
33,350 satisfied customers
i have a 98 yukon ..5.7 vortex engine that i caught in ...
i have a 98 yukon ..5.7 vortex engine that i caught in time water getting in oil,,changed oil and filter replaced lower and top intake gaskets , rotor button all wires and plugs, and oil pump, but...i… read more
Dan
Dan
Auto Technician
Associate Degree
GMC: chassis..brakes..fuel filter, exhaust system,mass air flow sensor
!997 GMC truck(Savannah) with cube extended chassis, it has been in for repair all week, cannot find out why, when cold, it does not run smooth and feels like the brakes are locked on then all of a su… read more
Dan
Dan
Auto Technician
Associate Degree
99 chevy: wheel drive..cold start..connector..egr valve and iac valve
I have a 99 chvy c2500 pu (old body) with a new engine 5.7 ,auto,2 wheel drive, new fuel pump/filter, fuel pressure regulator, ect sensor,all fresh spark system, cold start is fine, warm up is fine ru… read more
Hammer Time
Hammer Time
Mastertech
Vocational, Technical or Trade Scho
2,650 satisfied customers
i tried to start my 98 sileverado 5.7 vortec the other day
i tried to start my 98 sileverado 5.7 vortec the other day and just kept turning over. even after i took the key out of the ignition. the battery ended up frying. i replaced battery and also starter. … read more
john
john
Mechanic
High School or GED
154 satisfied customers
1998 Chevrolet truck: fuel leaking..flooding..5.7 engine..fuel lines
fuel leaking into intake area causing foul plugs and flooding condition what is this caused from 1998 chevy truck 5.7 engine Optional Information: 1998 Chevrolet truck 5.7 Already Tried: removed intak… read more
john
john
Mechanic
High School or GED
154 satisfied customers
Truck run fine on short trip 15-30 min. Dies..fuel pressure reads
Truck run fine on short trip 15-30 min. Dies and will not start, turns over but does not start. Check fuel pressure reads below recommend pressure of 60 psi fuel pump is on constintly and read about 5… read more
Hammer Time
Hammer Time
Mastertech
Vocational, Technical or Trade Scho
2,650 satisfied customers
96 gmc yukon: fuel injectors are located..with the 5.7 litre vortec
can you tell me where the fuel injectors are located on a 96 gmc yukon with the 5.7 litre vortec… read more
Hammer Time
Hammer Time
Mastertech
Vocational, Technical or Trade Scho
2,650 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

The nearest Volvo dealer is 160 miles away. Best $15 bucks I have spent in a long time!

Paul MCorpus Christi, TX

< Previous | Next >

Meet the Experts:

Chris (aka-Moose)

Chris (aka-Moose)

Technician

2,141 satisfied customers

24 years of experience diagnosing & repairing

Ted G.

Ted G.

ASE Certified Technician

1,861 satisfied customers

20 years auto repair experience, ASE Master Tech, Mechanical Failure consultant, Expert Witness

George H.

George H.

ASE Certified Technician

1,571 satisfied customers

ASE Master Tech 15+ yrs, AAS Automotive Technology, Factory trained Asian specialist

Amedee

Amedee

Former ASE Master Tech

2,912 satisfied customers

ASE certified tech advanced level specialist. Wisconsin certified emissions state inspector

Jerry

Jerry

Master Mechanic

2,181 satisfied customers

ASE master, 30+ years. All makes and models. Trouble shooter, shop forman, service manager

Richard

Richard

ASE Certified Technician

1,103 satisfied customers

12 years Ford Lincoln/Mercury Jaguar dealership as a technician and shop foreman reparing all makes

GM Tech (Cam)

GM Tech (Cam)

Auto Service Tech

704 satisfied customers

GM Grand Master Technician 2007. 14 years experience.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x