Car

Ask a mechanic online and get answers to your car questions

Connect one-on-one with {0} who will answer your question

Related Car Questions
wont start..replaced coil,plugs,still wont fire,no spark..wiring
my 1997 corsa wont start.i have replaced coil,plugs,still wont fire,no spark. possible break in wiring? where do i start?… read more
vauxdoc
vauxdoc
Vocational, Technical or Trade Scho
1,117 satisfied customers
1993 saab900s with 140,000 miles..driven..wont start at all..No firing
I have a 1993 Saab900s with 140,000 miles, it became hard to start and idled rough like it had a vacuum leak (soon after I had changed the oil). I have driven it maybe 5 or 6 times since and now it wo… read more
Chris Gast
Chris Gast
Technician
Vocational, Technical or Trade Scho
44 satisfied customers
real hard..starter and crank sencer,now it still cranks hard
i went to start .motor crank real hard like it was out of time.had to replace starter and crank sencer,now it still cranks hard and will not start… read more
Dennis
Dennis
Owner, Manager
Vocational, Technical or Trade Scho
104 satisfied customers
1995 GMC: It runs rough, the check engine light is on 85%..misfire
I have a 1995 GMC Jimmy. It runs rough, the check engine light is on 85% of the time. We took it to the shop, put on computer & mechanic said it showed a misfire. He replaced the fuel filter. He sugge… read more
Golden Wrench
Golden Wrench
Shop Manager, Automotive Tech Consultant
Vocational, Technical or Trade Scho
240 satisfied customers
94 GMC: crank..I have fuel pressure to the engine, but it wont start
Hi I have a 94 GMC Jimmy with a 4.3 W code Engine. IT will crank and I have fuel pressure to the engine, but it wont start. I have replaced the the Distributor module, Coil, plugs and wires, cap and r… read more
Jason
Jason
ASE Certified Technician
Vocational, Technical or Trade Scho
144 satisfied customers
super: rough..wont turn..new battery, new fuel pump and filter
i have a 96 geo tracker and it has starting issues...turn the key and it just cranks and cranks and nothing, hold the pedal down and it acts like it's going to start but wont, up to today, after 5 tri… read more
michael
michael
High School or GED
667 satisfied customers
98 jimmy with problems wont start..timing..i took the spark plugs..maf
i have a 98 jimmy with problems wont start just turns over i have spark fuel and timing when i took the spark plugs they were full of fuel i replaced but it still doing the same i fires up one time an… read more
Dan
Dan
Auto Technician
Associate Degree
headlights..hesitation..i changed spark plugs, plug wires, air filter
i was in a mud hole last night but as soon as i became stuck i shut off the engine but after a couple hours of trien to get it pulled out and the headlights on i cranked up the engine. now since it is… read more
OnlineHelp
OnlineHelp
Bachelor's Degree
3,390 satisfied customers
i have a 1999 sebring lxi coupe 2.5L V6 it just shuts ...
i have a 1999 sebring lxi coupe 2.5L V6 it just shuts down while driving every other day or when it fells like it, rpm drops to 0 sometimes starts back up right away, sometimes has to sit 30 min. had … read more
autodoc_2000
autodoc_2000
Automotive Technician/Asst Service Manag
Vocational, Technical or Trade Scho
2,556 satisfied customers
1993 mazda protege: hill..the dash lights..wouldnt start..spark plugs
I have a 1993 mazda protege and the other day when I was coming up the hill by my house the dash lights turned on like christmas and then wouldn't start so I had to coast into my drive way. Well short… read more
Jaxer Smith
Jaxer Smith
Owner
Technical
1,272 satisfied customers
1998 GMC: I replaced intake manifold gaskets..wont start..timing
I have a 1998 GMC Jimmy 4.3 L, I replaced intake manifold gaskets and now it wont start. I have fuel and spark but it sounds like the timing is out. What's the deal? Do I have to reset the computer an… read more
autodoc_2000
autodoc_2000
Automotive Technician/Asst Service Manag
Vocational, Technical or Trade Scho
2,556 satisfied customers
92 Mazda protege DX: it wont start at all..runs really ruff
I have a 92 Mazda protege DX. The car sometimes starts and sometimes it wont start at all. When it does start it runs really ruff and you have to idle it up really high to keep it running. I have repl… read more
ttiger79
ttiger79
Auto Mechanic
High School or GED
880 satisfied customers
crank sensor , heat sensor coil ,throttle position sensor..fuel pump
I have a 1995 Jimmy vortex 4.3 w series. It will not start cold and sometimes when it is hot. I have replaced crank sensor , heat sensor coil ,throttle position sensor,fuel pump realay and battery. Th… read more
mrrowland1
mrrowland1
Co-Owner/Az Mobile Reflash and Diagnosti
Associate Degree
164 satisfied customers
97 chrysler: conv v6..I replaced the wires and plugs
I have a 97 chrysler jxi conv v6 and not spark. I replaced the wires and plugs but there ia no spark going to the plugs. Where should I start? Does this have a coil pack and where is it located. tom O… read more
Brian W.
Brian W.
Master Auto Technician
Vocational, Technical or Trade Scho
358 satisfied customers
P300: same code..missfire..I have replaced the distributor cap & rotor
I keep popping the same code p0300 random missfire. I have replaced the distributor cap & rotor, plugs, & spark plug wires and I still can't get rid of this code. I clear the code, but it comes right … read more
Danny
Danny
Service Manager / Foreman
Vocational tech. and College
418 satisfied customers
Chevy: missfire..cyl..lite..2002 Chevrolet 1500 4.3 Already Tried
I have a 02 chevy 4.3 with missfire codes for cyl 2 4 6 only after replacing cap rotor and wires . I swaped out the plugs and still same problem it showes that bank running rich but plugs not wet or b… read more
Danny
Danny
Service Manager / Foreman
Vocational tech. and College
418 satisfied customers
gmc: anybody know how to put back the sparkplug wires
does anybody know how to put back the sparkplug wires on a gmc jimmy 1991 i tookm em off all by mistake at the same time now im not sure how to put them back please help me.… read more
Hammer Time
Hammer Time
Mastertech
Vocational, Technical or Trade Scho
2,650 satisfied customers
98 S10 4X4: put intake manifold gaskets..coolant leak..timing
Hi, I just put intake manifold gaskets on a 98 S10 4X4 with 4.3 engine to fix a coolant leak. Now the vehicle will not start. I have spark, fuel, and correct timing. Cranking vacuum seems really low b… read more
Steve
Steve
Service Manager/ Technician
5,473 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

The nearest Volvo dealer is 160 miles away. Best $15 bucks I have spent in a long time!

Paul MCorpus Christi, TX

< Previous | Next >

Meet the Experts:

Chris (aka-Moose)

Chris (aka-Moose)

Technician

1,853 satisfied customers

24 years of experience diagnosing & repairing

Ted G.

Ted G.

ASE Certified Technician

1,856 satisfied customers

20 years auto repair experience, ASE Master Tech, Mechanical Failure consultant, Expert Witness

George H.

George H.

ASE Certified Technician

1,571 satisfied customers

ASE Master Tech 15+ yrs, AAS Automotive Technology, Factory trained Asian specialist

GM Tech (Cam)

GM Tech (Cam)

Auto Service Tech

697 satisfied customers

GM Grand Master Technician 2007. 14 years experience.

Amedee

Amedee

Former ASE Master Tech

2,804 satisfied customers

ASE certified tech advanced level specialist. Wisconsin certified emissions state inspector

Jerry

Jerry

Master Mechanic

2,181 satisfied customers

ASE master, 30+ years. All makes and models. Trouble shooter, shop forman, service manager

Richard

Richard

ASE Certified Technician

1,099 satisfied customers

12 years Ford Lincoln/Mercury Jaguar dealership as a technician and shop foreman reparing all makes

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x