Car

Ask a mechanic online and get answers to your car questions

Ask an Expert,
Get an Answer ASAP!

Related Car Questions
I have 1974 old 455 engine. Oil pressure is 47 psi. From the
second opinion] I have 1974 old 455 engine. Oil pressure is 47 psi. From the picture you can see the compression test. There is lots of oil on the spark plug. Can you tell me how is this engine from t… read more
Gary
Gary
Senior Technician
Vocational, Technical or Trade School
1,933 satisfied customers
I have a 1974 El Camino with a 400 engine. The right blank
I have a 1974 El Camino with a 400 engine. The right blank blowes blue smoke. Number 4 cyclinder's spark plug is oily, the rest are not. The compression test shows very little pressure on 4 and rest a… read more
Marvin the Mechanic
Marvin the Mechanic
87 satisfied customers
Huyndai Santa Fe: New rebuild of a 2004 SanaFe 4cyl motor and
New rebuild of a 2004 SanaFe 4cyl motor and engine running like a deisel. Compression over 200psi. Fuel is burning before the spark. Timing is good, Any ideas on lowering the compression.? Heads honed… read more
George H.
George H.
ASE Certified Technician
Associate Degree
1,564 satisfied customers
Suzuki Carry: This vehicle is a Suzuki DA63T with the K6A engine.
This vehicle is a Suzuki DA63T with the K6A engine. Fuel injected. Wouldn't start. Took it to a mechanic. He said the computer showed all sensors working correctly and there were no error codes. He sa… read more
Greg
Greg
Shop owner, technician
Vocational, Technical or Trade Scho
5,804 satisfied customers
Engine stopped running. While on the road it appeared like it was running out of gas. (the
Engine stopped running. While on the road it appeared like it was running out of gas. (there was plenty of gas) Thought maybe gas pump failed, did not. Replaced fuel injectors and replaced rotor and a… read more
Gary
Gary
Vocational, Technical or Trade Scho
15,746 satisfied customers
2007 Jeep Wrangler: Hi, we just put in a long block on this
Hi, we just put in a long block on this truck. it ran fine for about 1000 mi. then began to run rough. It pulled a number 5 cylinder misfire code. We did a compression check and a leak down check. It … read more
Mike S.
Mike S.
Vocational, Technical or Trade Scho
8,022 satisfied customers
2000 Olds Alero: check engine light came..misfire..cylinder
Im having trouble with my daughters 2000 Olds Alero. Two days ago the check engine light came on and the car began sputtering. Code reader indicated misfire on cylinder 1. I have replaced the plugs, p… read more
Gary
Gary
Vocational, Technical or Trade Scho
15,746 satisfied customers
Having trouble starting..its making a cranking sound likeit..enging
my car is having trouble starting. it's making a cranking sound likeit's wanting to start, but it's not turning over. as i was driving, i Yielded to turn onto anouther street, and i heard something po… read more
Dan
Dan
Automotive Technician
Vocational, Technical or Trade Scho
23,904 satisfied customers
1997 Oldsmobile: Map sensor and Throttle Positioning sensor
1997 Oldsmobile 3.8 L will not start. ODB test came back Map sensor and Throttle Positioning sensor. I replaced both. Still not starting. Fuel is shooting out a good distance from the regulator shrade… read more
Tim Mohr
Tim Mohr
SHOP OWNER
Master's Degree
16,167 satisfied customers
98 Olds bravada: cranks..nuts !! Ran fine before stopped.. Cat plugged
HI !! I have a 98 Olds Bravada 4.3 that has fuel and spark and cranks just fine .. Will not start .. I am going nuts !! Ran fine before stopped.. Cat plugged ???… read more
ZZDaryl
ZZDaryl
Lead Auto Tech
Some college and advanced training
11,465 satisfied customers
1994 cadillac eldorado: stop engine, low oil presure, traction disable
hi, i get a problem with my 1994 cadillac eldorado rotates but will not star on the dash show me this change oil, stop engine, low oil presure, traction disable. what can be the problem and how can i … read more
Rixster
Rixster
Sr. Technician/Retired Owner
High School or GED
279 satisfied customers
1998 ford ranger 2.5 four cylinder. compression on cly 1-3
1998 ford ranger 2.5 four cylinder. compression on cly 1-3 had 160 psi comp.#4 o psi. Removed head gasket ok had head rebult at machine shop they pressured tested under heat checked ok. Put head back … read more
Triston
Triston
High School or GED
1,613 satisfied customers
87 Wagoneer: Jeep..It starts but will just die..starter..hole
I have a Jeep 87 Wagoneer , and It' starts but will just die. I have replaced the starter and checked for gas problems , It has a giant hole in the muffer… read more
William B
William B
Associate Degree
258 satisfied customers
1999 lumina: random/multiple cylinder misfire, replaced module
1999 lumina was running just fine,backed up and cut off. starts up like its out of time. got a code po300 random/multiple cylinder misfire, replaced module. did fine the wire from module to crankshaft… read more
Chuck
Chuck
Auto Repair Shop Owner
Vocational, Technical or Trade Scho
78 satisfied customers
1991 buick regal: fuses..put a fuel pressure test on it and all checks
i have a 1991 buick regal checked all fuses. put a fuel pressure test on it and all checks fine. checked for spark and have it. plug was dry. dont seem to be getting gas. any suggestions?… read more
Michael
Michael
Work Equip. Repair Foreman
Vocational, Technical or Trade Scho
554 satisfied customers
2000 Hyundai Elantra: fault code is a misfire..psi..fuel injector plug
My Dad's 2000 Hyundai Elantra engine runs rough and the fault code is a misfire on cylinder number 4. He had me change the plugs, I did a compression test, the cylinder had 130 psi pressure, I connect… read more
joseph carrillo
joseph carrillo
automotive drivability tech
Vocational, Technical or Trade Scho
314 satisfied customers
Star: trun..&n bsp; &nbs p; myis a2001pontiac grandam 3.4 eng
The car will not start,the engine will trun over, but it will not statr. I will like to no why. &nbs p; &n bsp; &nbs p; &n bsp; &nbs p; &n bsp; my is a 2001pontiac grand am 3.4 eng… read more
Michael
Michael
Work Equip. Repair Foreman
Vocational, Technical or Trade Scho
554 satisfied customers
Olds: rebuilt..high pressure oil pump..pressure when warm and 20 psi
I recently rebuilt a 455 CI Olds using 3 oil restricter plugs and a high pressure oil pump. I only have 5 lbs of pressure when warm and 20 psi @ 2400 RPM. I know people who have built them using the p… read more
Marc
Marc
fleet supervisor
Vocational, Technical or Trade Scho
1,140 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

The nearest Volvo dealer is 160 miles away. Best $15 bucks I have spent in a long time!

Paul MCorpus Christi, TX

< Previous | Next >

Meet the Experts:

Chris (aka-Moose)

Chris (aka-Moose)

Technician

1,345 satisfied customers

16 years of experience

Ted G.

Ted G.

ASE Certified Technician

1,754 satisfied customers

20 years auto repair experience, ASE Master Tech, Mechanical Failure consultant, Expert Witness

George H.

George H.

ASE Certified Technician

1,564 satisfied customers

ASE Master Tech 15+ yrs, AAS Automotive Technology, Factory trained Asian specialist

GM Tech (Cam)

GM Tech (Cam)

Auto Service Tech

680 satisfied customers

GM Grand Master Technician 2007. 14 years experience.

Amedee

Amedee

Former ASE Master Tech

2,562 satisfied customers

ASE certified tech advanced level specialist. Wisconsin certified emissions state inspector

Jerry

Jerry

Master Mechanic

2,181 satisfied customers

ASE master, 30+ years. All makes and models. Trouble shooter, shop forman, service manager

Richard

Richard

ASE Certified Technician

1,009 satisfied customers

12 years Ford Lincoln/Mercury Jaguar dealership as a technician and shop foreman reparing all makes

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x