How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka-Moose) Your Own Question
Chris (aka-Moose)
Chris (aka-Moose), Technician
Category: Car
Satisfied Customers: 1176
Experience:  16 years of experience
2499435
Type Your Car Question Here...
Chris (aka-Moose) is online now
A new question is answered every 9 seconds

Throwing p1125 and p1295 codes on a Isuzu Trooper 2000,

Customer Question

Throwing p1125 and p1295 codes on a Isuzu Trooper 2000
JA: Just to clarify, what's the exact code? And have you tried to reset it?
Customer: Yeah
JA: Are you fixing your Trooper yourself? What have you tried so far?
Customer: Yeah replaced range mode sensor and shift solenoids
JA: Anything else you want the mechanic to know before I connect you?
Customer: No that's it
Submitted: 2 months ago.
Category: Car
Expert:  Mechanic01 replied 2 months ago.

Hello my name is ***** ***** I will be assisting you with all of your vehicle questions today. Give me one moment while I review your question and come back with a answer. Please be aware I do not know your skill level or abilities so I will be asking a lot of questions and in a lot of cases we will respond to each other quite a lot before we find a solution. As far as phone calls are concerned that is the system prompting you, not me, and they do cost more money, I prefer text but in some cases a phone call is required.

Expert:  Mechanic01 replied 2 months ago.

Do you have the vin number for that ?

Customer: replied 2 months ago.

Jacds58x517jo3240

Expert:  Mechanic01 replied 2 months ago.

What is the vehicle doing exactly ?

Customer: replied 2 months ago.

Not shifting in to higher gear shows L when in drive

Expert:  Mechanic01 replied 2 months ago.

hows the fluid level and condition?

Customer: replied 2 months ago.

Just did trans fluid change and refill when I did solenoids

Expert:  Mechanic01 replied 2 months ago.

most common problem for that is a bad wiring harness, would you like the troubleshooting chart for that ?

Customer: replied 2 months ago.

Please

Expert:  Mechanic01 replied 2 months ago.

with these you should be able to pinpoint whats going on, let me know if you have any other questions

Customer: replied 2 months ago.

I'll let you know when I do it it's like 110 Fahrenheit where I am. So gotta wait for night

Expert:  Mechanic01 replied 2 months ago.

yeah no worries!

Customer: replied 2 months ago.

Okay here's the deal now the other trouble codes were because of something else I think I got the shop manual and from what I can tell now by taking apart the range mode sensor it keeps blowing out one of the circuits on the board

Expert:  Mechanic01 replied 2 months ago.

what circuit is blowing out and are you coding for the range mode sensor?

Customer: replied 2 months ago.

No code for sensor no codes at all anymore. And it's the grey line #7 that's blowing out

Expert:  Mechanic01 replied 2 months ago.

ok so im having some problems getting that wiring diagram ill have to open this up to the others to see if they can assist