How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris Your Own Question
Chris
Chris, Auto Service Technician
Category: Car
Satisfied Customers: 13883
Experience:  43 years of automotive repair, Smog license
12365498
Type Your Car Question Here...
Chris is online now
A new question is answered every 9 seconds

1994 dakota dies but will restart but dies again it keeps

Customer Question

1994 dakota dies but will restart but dies again it keeps dieing i get codes 12,25,32,11,62,&55
JA: Just to clarify, what's the exact code? And have you tried to reset it?
Customer: no just disconnect battery
JA: Are you fixing your Dakota yourself? What have you tried so far?
Customer: nothing yet
JA: Anything else you want the mechanic to know before I connect you?
Customer: no
Submitted: 9 months ago.
Category: Car
Expert:  Chris replied 9 months ago.

Hello, my name is ***** ***** I will assist you. Code 11 is loss of crank/ignition reference signal. Have you replaced the crank shaft position sensor yet?

Chris

Expert:  Chris replied 9 months ago.

Hello?

Customer: replied 9 months ago.
no
Customer: replied 9 months ago.
no thank you
Customer: replied 9 months ago.
when it first started this it was intermittent. then the amount of time between its dieing got shorter
Customer: replied 9 months ago.
i thought code 11 was just to let u no it was starting & code 55 was ending diagnostic
Customer: replied 9 months ago.
what is code 25,32,62
Customer: replied 9 months ago.
r u still here i m not getting an answer
Expert:  Chris replied 9 months ago.

Sorry, I was off line last night. Code 11 sets if there is no crankshaft position sensor or ignition reference signal. Code 25 is for the IAC (Idle Air Control motor) circuit, code 32 is for the EGR solenoid circuit, and 62? Not sure about that one. But your issue is code 11 which is causing the stalling. Replace the crank sensor. I am 99% sure that this will fix the stalling problem.

Chris