How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Jones Your Own Question
Daniel Jones
Daniel Jones,
Category: Car
Satisfied Customers: 505
Experience:  GM A Tech at Straub Buick GMC
15093763
Type Your Car Question Here...
Daniel Jones is online now
A new question is answered every 9 seconds

Trying to remove the driver side door panel to replace

Customer Question

trying to remove the driver side door panel to replace mirror assembly. cannot find a socket to fit the bolts inside the door panel cover.
Submitted: 1 year ago.
Category: Car
Expert:  Daniel Jones replied 1 year ago.

Hello. Welcome to the site. Thanks for coming. I'm ***** *****.
I'm here to provide as much information and insight as I can, to best answer your question.

GM used a few different types of screws on their door panel's.

If it's not a cross point(philips), it's probably a Torx. Usually a T15 or T20. If not they also used 7mm and 8mm. Attached is the location of the screws.

If you need more help, please use the "Reply" tab to continue our conversation - I'm happyto answer follow-up questions.
If you are satisfied with the information I supplied we would like to close out this question.

If you have no follow-ups at this time, please remember to Rate My Service.

Follow ups are free after ratings, so rate in confidence!

Thank you for posting your question.
Your business is very valuable to us.
Thank You
***** *****

Expert:  Daniel Jones replied 1 year ago.

Hi, Just wanted to get an update on how you made out with vehicle.
Thanks
Dan

If you need more help, please use the "Reply" tab to continue our conversation - I'm happy to answer follow-up questions.
Please take the time to leave feedback and rate my service for my response to your problem.

I don't get paid unless you rate my service.

Thank you for posting your question.

Your business is very valuable to us.

Thank You
***** *****