How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka-Moose) Your Own Question
Chris (aka-Moose)
Chris (aka-Moose), Technician
Category: Car
Satisfied Customers: 1176
Experience:  16 years of experience
Type Your Car Question Here...
Chris (aka-Moose) is online now
A new question is answered every 9 seconds

I am having a problem with my autel scanner ,bought from

Customer Question

I am having a problem with my autel scanner ,bought from cornwell tools, communicating with ecu on a recent vehicle, a 1996 rangerover hse with 4.6l, have power but wont communicate, followed wiring diagram and have seen where possible issues with scanner not recieving proper grounding or power values etc and could b fault for this , have checked ports 4 and 5 of dlc connector, but really have values to go by, have used all data, but really no specific pin point test etc.. if u could help point me in right direction would b awesome and appreciated, have an abs light and an srs light on ! Thank u
Submitted: 1 year ago.
Category: Car
Expert:  Greg replied 1 year ago.

Does the Autel light up when you are plugged into the DLC .

Which one do you have the DS708 ?

How long have you had it ,

How old ,

Up to date with updates ..

Rgds Greg