How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Car
Satisfied Customers: 23132
Experience:  ASE Master and Advanced level certified. Factory trained with 17 years dealership experience
9825021
Type Your Car Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

2003 xl7 set up behind motor home. Battery was dead,

Customer Question

2003 xl7 set up for towing behind motor home. Battery was dead, recharged with a commercial charger. After charging battery Airbag light on, scanner indicates high resistance drivers side. Cruise control inop, clock steady, not flashing.
Submitted: 1 year ago.
Category: Car
Expert:  sprinkles08 replied 1 year ago.

Hello and welcome to JustAnswer!

If you have a code for the driver's airbag squib circuit along with the cruise control not working the most likely cause would be the clockspring. The clockspring is in the steering column just under the wheel and is what makes electrical contact with the steering wheel yet allows it to turn. All electrical items on the steering wheel run through the clockspring and if circuits in the clockspring break then it can take down any combination of items on the steering wheel. If the cruise stopped working at exactly the same time the airbag light started then you most likely have a broken clockspring.