How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka-Moose) Your Own Question
Chris (aka-Moose)
Chris (aka-Moose), Technician
Category: Car
Satisfied Customers: 1176
Experience:  16 years of experience
Type Your Car Question Here...
Chris (aka-Moose) is online now
A new question is answered every 9 seconds

365 GT 2+2: Ferrari 365 2+2 head torque spec.

Customer Question

Ferrari 365 2+2 head torque spec. Understand that the block is the same as Daytona with full length studs into block. Torque to 62 or 72 foot pounds? Also having trouble with head gasket sealing. Elwing gaskets. Can't find the Australian ones any place. thanks
Submitted: 2 years ago.
Category: Car
Customer: replied 2 years ago.
Ferrari tech manual for this engine says 62 # ***** talked with several Ferrari experts Mike Sheahan and Tom Yang and told me 72# ***** the correct number. Engine has been completely gone thru and reassembling now but have had trouble with head gasket sealing. One side has Australian manufactured gasket but got other from GT Auto part in AZ. The won't seal. The sent me Elwing and have had trouble with them as well. Leaking water. Check deck height and is in spec and head are with in less than a 1/2 thousands
Customer: replied 2 years ago.
Australian gaskets work no problem
Customer: replied 2 years ago.
Also checked cylinder liner deck height spec and is also in spec with in 1/2 thousands
Customer: replied 2 years ago.
When can I expect an answer? email or text to(###) ###-####