How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George H. Your Own Question
George H.
George H., ASE Certified Technician
Category: Car
Satisfied Customers: 18692
Experience:  ASE Master Tech 15+ yrs, AAS Automotive Technology, Factory trained Asian specialist
Type Your Car Question Here...
George H. is online now
A new question is answered every 9 seconds

fleetcraft camper: Trailer/Camper Wiring I am rewiring a camper

This answer was rated:

Trailer/Camper Wiring I am rewiring a camper with a standard flat 4 connector. Instead of using the frame for ground will it work to run a white wire to each assemble housing and connect them all up with the white from the vehicle? I have 2 tail assemblies (brake/turn) and 2 side markers. Thank you

Hello I will help you with your question,

Yes you can ground each lamp to a central point then connect that to the vehicle ground, that is the same as using the frame.

Please let me know how I can help you

Thank you

George H. and 8 other Car Specialists are ready to help you

Related Car Questions