How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask K. Wiggins Your Own Question
K. Wiggins
K. Wiggins, ASE Certified Technician
Category: Car
Satisfied Customers: 2958
Experience:  ASE Certified Technician, Associates Degree in Automotive Technology, 15+ years in the trade
Type Your Car Question Here...
K. Wiggins is online now
A new question is answered every 9 seconds

highlander: Need instructions from an actual Toyota service

This answer was rated:

Need instructions from an actual Toyota service repair manual to replace the windshield washer pump.
I cannot find the actual pages from Toyota on replacement , but can offer you the steps and pictures from personal knowledge.
1. Turn wheels to the left
2. Jack up right side of vehicle so right front tire is off the ground
3. Remove two screw that extend under right side of bumper
4. Remove three screw at front of wheel well liner
5. Pull liner back (It will flex)
6. Unplug electrical connector from pump
7. Remove pump from reservoir (twist and pull)
K. Wiggins and 8 other Car Specialists are ready to help you