How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Technician
Category: Car
Satisfied Customers: 28815
Experience:  17 years automotive training and experience.
Type Your Car Question Here...
Pete is online now
A new question is answered every 9 seconds

Maserati QP GT Sport: How to change a break light bulb on a

Customer Question

How to change a break light bulb on a 2007 Maserati QP GT Sport right side?
Submitted: 4 years ago.
Category: Car
Expert:  Pete replied 4 years ago.
My name is Pete and I am a professional here at Just Answer. I noticed that your question was not getting a response and thought I would ask to see if you still need help with this.
Customer: replied 4 years ago.
Yes I still need help
Expert:  Pete replied 4 years ago.
Is there any way you can take a picture of this light assembly and light socket and post it here.You can use the paper clip icon to upload the picture.

Let me know,thanks Pete.
Customer: replied 4 years ago.
I have the picture can I email it to you
Expert:  Pete replied 4 years ago.
You can upload it here using the paper clip icon above.
Customer: replied 4 years ago.
I emailed the picture to [email protected]
Expert:  Pete replied 4 years ago.
The email address doesn't show up here,the only way I can receive the picture is through this posting here.If you emailed it to just answer it may show up here but might take a little time to do so.

If when looking at the socket if it looks to be one that twists to be removed usually these are turned counter clockwise to then be able to release the socket from the lamp assembly.Then the bulb can be replaced from there.It may need slight jiggling to get it to turn but it should turn fairly easily.

Thanks Pete.