How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask carguyjosh Your Own Question
carguyjosh, ASE Certified Technician
Category: Car
Satisfied Customers: 2172
Experience:  16 yrs. in professional shop,,ASE auto technician,service on all makes and models
Type Your Car Question Here...
carguyjosh is online now
A new question is answered every 9 seconds

I have a 4 cylinder tractor engine, I think firing order is

Customer Question

I have a 4 cylinder tractor engine, I think firing order is 1432.
How do I set the valve clearance, in what order please.
Intake is .25mm and exhaust .35mm
Submitted: 4 years ago.
Category: Car
Expert:  carguyjosh replied 4 years ago.

Good morning.

The firing order sounds correct. Next.

There is a simple method to adjusting valves. It works on all engines.

Go one cylinder at a time and adjust the intake valve as the exhaust valve opens and adjust the exhaust valve as the intake valve closes.

Like I said, always keep this method in mind and you can adjust every engine in this manner.

Thanks, Josh

Expert:  carguyjosh replied 4 years ago.

Good evening.

I just wanted to check in to make sure that my information was helpful.

Please let me know..Thanks, Josh