How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask tripletauto Your Own Question
tripletauto, ASE Certified Technician
Category: Car
Satisfied Customers: 502
Experience:  ase certifed master tech gm certifed 20 years experience
Type Your Car Question Here...
tripletauto is online now
A new question is answered every 9 seconds

Isuzu Ascender: How do I replace the stabilitrak module on

This answer was rated:

How do I replace the stabilitrak module on my 2007 Isuzu Ascender 2wd i290?

The stabilitrak works off of the abs module (ebcm). Is this what you replaced? This would not cause your vehicle to not start. Is theft light staying on?

Customer: replied 4 years ago.

I replaced the Eng/Motor Cont Mod 590-00744, stock # XXXXX This was supposed to be the stabilitrak module. nothing else was replaced. I think this may need to be programmed, but I have no other information

By that part number you replaced the ecm. This is the engine control module. Yes it has to be programmed and then theft learn done. This is why engine will not crank.
tripletauto and 2 other Car Specialists are ready to help you