How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask proautotech Your Own Question
proautotech
proautotech, Auto Mechanic
Category: Car
Satisfied Customers: 1243
Experience:  College Training. Current Lead Tech
67965572
Type Your Car Question Here...
proautotech is online now
A new question is answered every 9 seconds

96 eagle talon esi need help with valve timing. were does the

This answer was rated:

96 eagle talon esi need help with valve timing. were does the fowl pins need to be to be properly timed
Thanks for trusting us with your problem. I have trained in the automotive field and currently work as a lead technician. I will be helping you today

You just need the timing belt procedure correct?
Customer: replied 5 years ago.
I need to to time the engine because it won't start and I have no spark to the plugs. I just replace the head gasket but failed to make timing marks before I removed the timing belt from the cam speakers
Follow the steps by CLICKING HERE

Once you have them set up use vise grips to hold the belt in place on the cam gears. Than turn engine over by hand 3 times. Wait about 20 minutes to be sure the tensioner is good.
proautotech and 4 other Car Specialists are ready to help you
Customer: replied 5 years ago.
is there timing marks on the on the cam sprockets that I can use to set the timing
Correct. You will line the two just as it shows in the manual!
Customer: replied 5 years ago.
I now have spark to the plugs after getting the timing belt on but the engine cranks normal but won't start still and the computer adjusts the timing what do I do next
Check the compression and do a leak down test.

It is possible if the timing was off you now have a bunch of bent valves!