How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask mechanicaltone Your Own Question
mechanicaltone, Mechanic
Category: Car
Satisfied Customers: 233
Experience:  Hi my name is Tony. I have been a qualified mechanic for over 12 years.
Type Your Car Question Here...
mechanicaltone is online now
A new question is answered every 9 seconds

Daihatsu Sirion: I have a Daihatsu Sirion with the K3 V2 engine. I

This answer was rated:

I have a Daihatsu Sirion with the K3 V2 engine.
I have tried to scan with 3 different OBII scanners but it gives me "error connection".
I read the trouble codes by the blinking lights and it gives me the 75 error code.
It is supposed to be difference between crankshaft and camshaft position but I check the position of camshafts and crankshaft by removing the valve cover and it was as supposed to be. The timing chain is new also.
I also replace the ECU and it gives the same code error 75.
Please your comments
Hi have you tried replacing the camshaft or crankshaft sensor? One could be giving a faulty reading.
mechanicaltone and 5 other Car Specialists are ready to help you
Customer: replied 4 years ago.
I replaced both and no change
Customer: replied 4 years ago.
I have replace both sensors
Hi what are the symptoms other than the code you are reading? Is the engine light on?
Customer: replied 4 years ago.
The check light is on

Hi if the chain is fitted to the correct timing marks and you have changed both sensors and there is a error trying to read the computer you could have some faulty wiring. Have you checked the wiring

Customer: replied 4 years ago.
I will try to do that
great let me know how you go