How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim's Auto Repair Your Own Question
Tim's Auto Repair
Tim's Auto Repair, Mechanic
Category: Car
Satisfied Customers: 15926
Experience:  Have owned a repair shop for 25 yrs.
14541291
Type Your Car Question Here...
Tim's Auto Repair is online now
A new question is answered every 9 seconds

How can i bypess security light on 2000 s-10 chevy trk 4 cyl

This answer was rated:

how can i bypess security light on 2000 s-10 chevy trk 4 cyl
tims auto repair :

hi

tims auto repair :

please tell me what is going on

tims auto repair :

is the security light staying on?

tims auto repair :

and the truck wont start?

tims auto repair :

please explain

tims auto repair :

are you there?

Tim's Auto Repair and other Car Specialists are ready to help you
chat may not be working for you..lets try this
:

please tell me what is going on

is the security light staying on?

and the truck wont start?

please explain

Customer: replied 4 years ago.
sometimes security light stays on and sometime i have to wait ten minutes before it will start

i cannot start s-10 chevy when security light is on how can i bypass that system
hi
when the security light is on...
lets try this
thanks
30 Minute Re-Learn Procedure
1. Turn ON the ignition, with the engine OFF.
2. Attempt to start the engine, then release the key to ON (vehicle will not start).
3. Observe the SECURITY telltale[this is your security light], after approximately 10 minutes the telltale will turn OFF.
4. Turn OFF the ignition, and wait 5 seconds.
5. Repeat steps 1 through 4 two more times for a total of 3 cycles/30 minutes (the vehicle is now ready to relearn the Passlock(TM) Sensor Data Code and/or passwords on the next ignition switch transition from OFF to CRANK).

IMPORTANT: The vehicle learns the Passlock(TM) Sensor Data Code and/or password ***** the next ignition switch transition from OFF to CRANK. You must turn the ignition OFF before attempting to start the vehicle.

6. Start the engine (the vehicle has now learned the Passlock(TM) Sensor Data Code and/or password).
7. With a scan tool, clear any DTCs if needed (history DTCs will self clear after 100 ignition cycles).