How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask AMD Your Own Question
AMD, Master Technician
Category: Car
Satisfied Customers: 2727
Experience:  L1 Advanced Level Diagnostics Specialist
Type Your Car Question Here...
AMD is online now
A new question is answered every 9 seconds

2005 Scion xB: my options to install the new front plate?

This answer was rated:

My 2005 Scion xB is missing the wholes / screws to install a front licence plate, since it was previously registered in AZ. What are my options to install the new front plate?
Hello and thank you for choosing just answer.
In order to install your front license plate you will need 2 self tapping screws the dimensions of the self-tapping screws are as follow:
Nominal Length: 18.0 mm (0.71 in.)
Diameter: 6.0 mm (0.24 in.)
You will then need to locate 2 dimples on the bumber as shown in this picture:
AMD and 5 other Car Specialists are ready to help you